Cambridgeshire · England
Bath re-enamelling & resurfacing in Waterbeach, Cambridgeshire
Bath re-enamelling across Waterbeach and nearby, typically in one visit and guaranteed for a year.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Worn patches where water runs and sits
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
How we handle bath re-enamelling in Waterbeach
We do not move the bath, so the taps, tiles and plumbing aren’t touched. It usually takes one visit, with the bath ready to use the following day. Typical jobs include lots of chips and rust spots and worn patches where water runs and sits, on Victorian roll-tops, acrylic baths and basins & shower trays.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Area
- Waterbeach (CB25)
- Area hub
- Cambridgeshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. We charge the same across the UK, including Waterbeach. The price reflects:
- How many areas need work
- Any earlier repairs that need removing first
- The colour and finish to match
- What kind of damage it is
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Getting a price from photos
Two or three clear photos are typically enough. Try to include:
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
- A coin beside the damage so we can judge size
- Where you are, by postcode
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Common questions in Waterbeach
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
How do I get a price for bath re-enamelling in Waterbeach?
Prices start from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.
Will there be a smell?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
What we do, step by step
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we’re doing. Most jobs take a full day, and you can get on with other things while we’re there.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s generally ready the next day.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Plan for the room to be out of bounds to pets and children
- Let us know if it has been repaired before
Get a quote
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed price back. There is no charge for the quote and no obligation.
Read more
Waterbeach and the surrounding area
Waterbeach is about 5 miles north-east of Cambridge, in Cambridgeshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover all 371 towns and villages in Cambridgeshire. Our nearest city page is London, about 55 miles away.
Here we cover the CB25 postcode area. Jobs here include addresses on High Street, Station Road and Way Lane. We also cover the places around Waterbeach: Clayhithe (1 mile south), Landbeach (1 mile west), Horningsea (2 miles south), Milton (2 miles south-west) and Cottenham (3 miles north-west). Within a short drive, we also cover Cambridge (5 miles south-west), St Ives (12 miles west), Newmarket (9 miles east), Ely (10 miles north), Cambourne (12 miles west) and Chatteris (14 miles north-west).
What’s near Waterbeach
Typical jobs here are in homes near Church of St John, Waterbeach Community Primary School and Church of St John, among other places. The nearest railway station is Waterbeach station, roughly 0.5 miles south of the centre. Other landmarks nearby include The Farmland Museum (1.9 miles north) and Brookfields Hospital (5.2 miles south).
Nearby places to Waterbeach
More services for Waterbeach
Repair or replace: which is better?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, so there is no premium for Waterbeach. What changes the price is the job itself: the material, the amount of damage and how many items.
Why book with us
- One-year guarantee on every repair
- Colour mixed on the day to match
- No extra charge for your area
- We leave the room as we found it
Take a look at our prices page and guide to resurfacing and replacement costs.
Keeping it looking good
Once the work has cured, treat it gently:
- Don’t use the bath until it has fully cured
- Wash away dyes and oils after use
- Use washing-up liquid and a soft cloth
- Fix dripping taps quickly
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Do you need bath re-enamelling in Waterbeach?
Enamel does not fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
Most people contact us after spotting something like this:
- Chips and rust in more than one place
- A coloured bath you want in white
- A period or roll-top bath worth keeping
- An old resurfacing that is failing
What your quote should include
- Whether cleaning and preparation are in the price
- Who turns up on the day
- How your room will be protected
- What happens if they find more damage
Honest limits
We’ll always be straight with you, so here’s what a repair cannot fix:
- A cast iron or steel bath that’s cracked right through
- Anything hidden under an old coating, until we remove it
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send photos and we’ll say what we think before booking.
Surfaces we repair
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
About our accreditations · Every repair comes with a one-year guarantee.
