Lincolnshire · England
Bath Re-enamelling in Welton le Marsh
Problem with your bath in Welton le Marsh? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Chips and rust in more than one place
- A bath in a colour that no longer suits
Where we work around Welton le Marsh
Welton le Marsh is about 7 miles north-west of Skegness, in Lincolnshire. Jobs in Welton le Marsh are booked in like any other job: a fixed price from your pictures, then a visit to do the work. Welton le Marsh is one of 732 places in Lincolnshire where we work.
We cover every part of the PE23 postcode area. Jobs here include addresses on Beck Lane, Mill Lane and Hanby Lane and the roads around them. We also cover the places around Welton le Marsh: Candlesby (1 mile south-west), Scremby (2 miles west), Ashby by Partney (3 miles south-west), Great Steeping (3 miles south-west) and Partney (4 miles west). Within a short drive, we also cover Louth (14 miles north-west), Skegness (7 miles south-east), Horncastle (13 miles west), Mablethorpe (10 miles north), Sutton on Sea (8 miles north-east) and Spilsby (5 miles west).
Local landmarks in Welton le Marsh
Our customers here include homes close to Church of St Martin and the streets around them. Other landmarks nearby include Mawthorpe Bygones Museum (2.9 miles north) and Dalby Old Hall Holt (3.6 miles west). Open spaces near Welton le Marsh include Miles Cross Hill.
How we handle bath re-enamelling in Welton le Marsh
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Common call-outs are for thin, worn enamel in places and enamel that’s lost its shine and feels rough, in acrylic baths, cast iron baths and basins & shower trays.
The work is covered for a year after we finish. Just call us if there’s a problem and we will sort it.
- Area
- Welton le Marsh (PE23)
- Region
- Lincolnshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Signs you need bath re-enamelling in Welton le Marsh
Older baths frequently have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
These are the problems we are asked about most:
- A coloured bath you want in white
- Wear marks under the taps
- A bath that stays dull however much you clean it
- A coating lifting around the plughole
Comparing quotes
- Is the price fixed, and does it include VAT?
- Who turns up on the day
- How soon you can use it again
- How your room will be protected
Looking after it afterwards
It’s all simple stuff, just a few sensible habits:
- Do not leave a chip unrepaired
- Dry the bath after use to stop limescale
- Clean with a soft cloth and mild detergent
- Fix dripping taps quickly
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Prices and what affects them
Resurfacing from £350. Quotes are free and the price is fixed. What we look at:
- How easy the damage is to reach
- The material
- How much damage there is
- Any earlier repairs that need removing first
Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
How to get a fixed price
A couple of clear pictures is all it takes. Try to include:
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
- Where you are, by postcode
- Whether it’s been repaired or coated before
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
When we’d advise against a repair
It helps to know what we can’t do:
- Plumbing leaks, which need a plumber
- A bath that’s rusted through
- Problems we cannot see until an old finish comes off
Send us pictures and we will tell you honestly before booking.
Materials we work on in Welton le Marsh
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
The process
On the day itself, there is little for you to do. Let us in and show us the room, and we will get on with it. The job generally runs to the best part of a day, including clearing up.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Make sure the room can be ventilated
- Clear the area around the damage
- Mention any earlier repairs or resurfacing
Ask for a price
The quickest way to a price is to send two or three photos through our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Advice
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Repair or replace in Welton le Marsh?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
What you get with us
- Every repair guaranteed for a year
- Colours mixed by hand to suit your surface
- Nothing taken out or refitted
- CHAS, Constructionline and SafeContractor accredited
Take a look at our full price list or bath cost comparison.
Landlord and trade work in Welton le Marsh
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Places near Welton le Marsh
Also in Welton le Marsh
FAQs for Welton le Marsh
What happens once I’ve sent photos?
You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Are there extra charges for Welton le Marsh?
Travel is included in the price, with the same prices everywhere we work.
About our accreditations · Every repair comes with a one-year guarantee.
