Lincolnshire · England
Bath Re-enamelling for Scremby homes
Damaged bath in Scremby? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A dull, rough surface that won’t come clean
Bath re-enamelling in Scremby, done in place
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. If you’re dealing with an original cast iron bath that needs restoring and an old resurfacing that’s failing, we can usually put it right.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Location
- Scremby (PE23)
- Region
- Lincolnshire
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What we cannot put right
A few problems are outside what a surface repair can do:
- A metal bath with a through crack
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
If in doubt, send pictures and we will say what we think.
Materials we repair
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
What we’re called out for in Scremby
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
People usually call us when they notice one of these:
- A bath that stays dull however much you clean it
- Staining under the taps and around the waste
- An outdated colour you’d like to change
- Several chips and rust patches
Before booking anyone
- What protection goes down before work starts
- Aftercare advice
- Whether a trained technician does the job
- How changes to the job are handled
Looking after it afterwards
To keep it looking its best:
- Wipe the bath dry after use in hard water areas
- Have chips seen to early
- Leave the bath for the full curing time before using it
- Wash away dyes and oils after use
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
For landlords and businesses
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we will arrange it.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Scremby: your questions answered
Can landlords book you?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
What happens once I’ve sent pictures?
We come back with a fixed quote. There’s no obligation to book.
Can you fix a peeling bath coating?
Usually, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.
Will there be fumes?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
Is my repair covered?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Prices and what affects them
Prices start from £350. Each job gets its own fixed price. This is what makes a difference:
- The colour and finish to match
- What the surface is made of
- Doing more than one item at once
- Access to the area
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
How to get a fixed quote
We price nearly every job from pictures. This is what we need:
- What it’s made of, if you know
- Whether it’s been repaired or coated before
- Where you are, by postcode
- Good light, ideally daylight, without flash glare
Upload photos of the damage and a wider shot of the entire item, with your PE23 postcode, and we’ll reply with a fixed quote.
Also near Scremby
What else we do in Scremby
Where we work around Scremby
Scremby is about 8 miles west of Skegness, in Lincolnshire. Book a date that suits you, and we will give you an arrival time in advance, so you’re not left waiting in all day. We work in 732 places across Lincolnshire.
Our visits in PE23 work the same way as everywhere else we cover. Streets in the area include Cook's Lane and Lowgate Road, all of which we cover. If you’re just outside Scremby, we cover Candlesby (1 mile south-east), Ashby by Partney (1 mile south-west), Welton le Marsh (2 miles east), Partney (2 miles west) and Great Steeping (2 miles south). Within a short drive, we also cover Louth (14 miles north-west), Skegness (8 miles east), Horncastle (11 miles west), Mablethorpe (11 miles north), Sutton on Sea (10 miles north-east) and Spilsby (3 miles south-west).
What’s near Scremby
We visit homes around Church of St Peter and St Paul. Scremby’s nearest station is Thorpe Culvert station, about 4.8 miles south of the centre. Nearby you’ll also find Alford and District War Memorial Cottage Hospital (4.8 miles north) and Mawthorpe Bygones Museum (3.6 miles north). The countryside around Scremby includes Miles Cross Hill.
Repair or replace: which is better?
If the bath is sound, re-enamelling is typically much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Prices start from £350. We charge the same wherever you are, with no extra for Scremby. The job itself decides the price: how much damage, what it’s made of and how many items.
Why us?
- One visit for most repairs
- We leave the room as we found it
- Every repair guaranteed for a year
- Nothing taken out or refitted
Read our full price list and guide to resurfacing and replacement costs.
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What we do, step by step
We begin by going over the job with you. Next, we cover and mask everything nearby and the work begins. You can expect it to take the best part of a day.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Before we arrive
- Make sure the area is dry
- Open a window if you can
- Tell us if there are stairs or a lift
Ask for a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
