Cardiff · Wales

Bath re-enamelling & resurfacing in Wenallt, Cardiff

Problem with your bath in Wenallt? We put it right where it is, match it on site and back it with a one-year guarantee.

  • Resurfacing from £350
  • A coating lifting around the plughole
  • An original cast iron bath that needs restoring
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Wenallt homes

Wenallt questions

Do I have to be there?

Yes. We need access to the room while we work, at a time that suits you.

Which areas do you work in?

Everywhere in the UK, Wenallt included. There’s no extra charge for travel.

Can you fix a peeling bath coating?

In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.

Is there a call-out fee?

Travel is included in the price, and we charge the same wherever you are.

How durable is a resurfaced bath?

A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.

Can you do the outside of a roll-top?

Yes. We can do the inside and outside.

What do you need from me?

Photos of the damage, a picture of the whole bath and your postcode. After that, we just agree a date.

Can you price it without visiting?

In nearly every case. If photos don’t show enough, we’ll ask for another angle.

How we handle bath re-enamelling in Wenallt

We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. If you’re dealing with a coating lifting around the plughole and a coloured bath you want in white, we can help, on acrylic baths, basins & shower trays and cast iron baths alike.

Every repair comes with our one-year guarantee, wherever you are in Cardiff.

Where
Wenallt (CF14)
Region
Cardiff
Guarantee
12 months on all our work
Quote
From £350. Fixed and free, based on pictures
Call
0345 017 0787
Updated
23 October 2026
Stained basin resurfaced to clean white (before and after)

Repairing versus replacing in Wenallt

Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling renews the whole surface with the bath left where it is. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not where you live. The full price is agreed before booking, with nothing added on the day.

Why Wenallt customers choose us

  • Free fixed quotes from pictures
  • Colour-matched on site
  • No extra charge for your area
  • Rooms protected and left tidy

Take a look at our full price list or guide to resurfacing and replacement costs.

Wenallt and nearby

Wenallt is about 3 miles south of Caerphilly, in Cardiff. We visit clients in Wenallt, so nothing has to leave your home. We cover all 91 towns and villages across Cardiff.

Every address in CF14 is covered, from the main roads to the quietest streets. We also cover the places around Wenallt: Pant-mawr (1 mile south), Rhydwaedlyd (1 mile south-east), Thornhill (1 mile north), Coryton (1 mile south-west) and Rhiwbina (1 mile south). Within a short drive, we also cover Cardiff (3 miles south-east), Ely (4 miles south), Castle (4 miles south-east), Adamsdown (5 miles south-east), Roath (4 miles south-east) and Splott (5 miles south-east).

Landmarks near Wenallt

In Wenallt, that means homes near Llanishen Fach Primary School, Llanishen High School and Fynnon Wen Public House. The closest station to Wenallt is Rhiwbina station, roughly 1.3 miles south of the centre. Other landmarks nearby include St Martins (1.7 miles north) and Welsh Museum of Health and Medicine (2.1 miles south-west). Green spaces nearby include Roath Park Lake and Wenallt Hill.

Map of Wenallt © OpenStreetMap contributors

What a repair can’t fix

A repair isn’t always the answer, and we will tell you before we start. We can’t fix:

  • A bath that is rusted through
  • Anything hidden under an old coating, until we remove it
  • Acrylic that moves when you stand in it

Not sure? Send pictures and we will give you a straight answer.

Materials we repair

  • Acrylic baths
  • Victorian roll-tops
  • Cast iron baths
  • Basins & shower trays
  • Pressed steel baths

What happens on the day

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take most of the day. We clean up when we are done and tell you when it’s ready to use.

  1. We mask and protect the room and ventilate it.
  2. The bath is cleaned, degreased and any chips or rust repaired.
  3. The surface is prepared and a bonding primer applied.
  4. We spray on the new enamel finish in several coats.
  5. The bath is left to cure and can normally be used the next day.

How to prepare

  • Avoid using the area for a few hours before we arrive
  • Keep pets and children out of the room while we work
  • Clear toiletries, mats and anything else from around the area

How to get a price

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.

Get a free quote

Advice

Repairs by material

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

Can I fix it myself?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.

Work for landlords and builders

Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.

Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.

When to call us in Wenallt

Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.

Keep an eye out for these signs:

  • A coating lifting around the plughole
  • A bath in a colour that no longer suits
  • Lots of chips and rust spots
  • Worn patches where water runs and sits

What to look for in a quote

  • Is the price fixed, and does it include VAT?
  • What aftercare is recommended
  • How the colour is matched
  • Who turns up on the day

Choosing a repair company

How to care for the repair

So the finish stays in good condition for years:

  • Respect the curing time we give you
  • A dripping tap should be fixed promptly
  • Keep toiletries on a shelf rather than in the bath
  • Don’t let dyes or oils sit on the finish

Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.

Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.