Cardiff · Wales

Bath re-enamelling & resurfacing in Pant-mawr, Cardiff

Local bath re-enamelling for Pant-mawr: photo quotes, tidy work and a year’s guarantee.

  • Resurfacing from £350
  • Thin, worn enamel in places
  • A peeling or bubbling previous coating
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Pant-mawr

Why repair rather than replace?

Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Prices start from £350. A repair normally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.

Why choose Surface Doctor in Pant-mawr

  • Colour mixed on the day to match
  • No extra charge for your area
  • Accredited with CHAS, Constructionline and SafeContractor
  • Rooms protected and left tidy

Read our full price list and guide to resurfacing and replacement costs.

How we handle bath re-enamelling in Pant-mawr

We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Common call-outs are for a bath in a colour that no longer suits and a bath that stays dull however much you clean it, across acrylic baths, cast iron baths and basins & shower trays.

We stand behind the work with a one-year guarantee, so you’re not left on your own once we’ve gone.

Where
Pant-mawr (CF14, CF15)
Region
Cardiff
Cover
One year on every repair
Quotes
From £350. Fixed and free, based on photos
Telephone
0345 017 0787
Last updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

What we do, step by step

From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a full day, and we finish with a tidy-up and a look at the finished work together.

  1. We mask and protect the room and ventilate it.
  2. The bath is cleaned, degreased and any chips or rust repaired.
  3. We prepare the surface and apply a bonding primer.
  4. Several coats of new finish are sprayed on.
  5. We leave it to cure, and it’s generally ready the next day.

Preparing for the visit

  • Tell us about any previous repairs or coatings
  • Ensure the room can be ventilated
  • Plan for the room to be out of bounds to pets and children

Get a quote

Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and you’re under no obligation.

Get a free quote

Related advice

DIY kit or professional repair?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

Landlords, agents and businesses in Pant-mawr

If you manage property in Pant-mawr, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Pant-mawr and nearby

Pant-mawr is about 3 miles north-west of Cardiff, in Cardiff. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We cover all 91 towns and villages across Cardiff.

All of CF14 and CF15 is covered, from the main roads to the quietest streets. Whether you live on Park Lane, Park Avenue and Pantmawr Road or a nearby road, a technician can come to you. We also cover the places around Pant-mawr: Coryton (1 mile south-west), Whitchurch (1 mile south-east), Rhiwbina (1 mile south-east), Rhydwaedlyd (1 mile east) and Tongwynlais (1 mile west). Larger places within reach include Cardiff (3 miles south-east), Ely (3 miles south), Castle (3 miles south-east), Adamsdown (4 miles south-east), Roath (4 miles south-east) and Splott (4 miles south-east).

What’s near Pant-mawr

In Pant-mawr, that means homes near Radyr Comprehensive School, The Pantmawr Inn and Hailey Park. Also close by are Coryton Primary School (within half a mile south-west) and Whitchurch Hospital (0.6 miles south). Pant-mawr has its own railway station: Coryton station. Further afield, we also cover the area around Twmpath Motte (0.5 miles north-east) and Whitchurch Hospital (0.7 miles south). Not far away are Glamorgan Canal / Long Wood and Roath Park Lake.

  • Local facilities include Creigiau & St Fagans (2.4 miles west)
Map of Pant-mawr © OpenStreetMap contributors

What we are called out for in Pant-mawr

By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.

Send us a picture if you notice any of these:

  • An outdated colour you’d like to change
  • Chips and rust in more than one place
  • A dull, rough surface that won’t come clean
  • Thin, worn enamel in places

What your quote should include

  • How to look after the finish
  • If travel is included in the price
  • What protection goes down before work starts
  • What happens if they find more damage

Choosing a repair company

Repairs by material

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.

Pressed steel

Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.

Looking after it afterwards

How the surface is treated afterwards matters. Here’s what we suggest:

  • Fix dripping taps quickly
  • Wipe the bath dry after use in hard water areas
  • Avoid suction-cup mats
  • Have chips seen to early

Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.

On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.

Pant-mawr: your questions answered

Do you resurface freestanding baths?

Yes, often. The inside is resurfaced, and we can refinish the outside as well.

Can you price it without visiting?

Yes, almost always. Clear pictures let us give you a fixed price without visiting.

Will there be a smell?

There may be a mild smell during the work, which fades afterwards.

How do I get a price for bath re-enamelling in Pant-mawr?

Resurfacing from £350. We give a fixed quote from your pictures. Send a close-up and a photo of the whole item with your CF14 postcode.

What happens next?

We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we’ll ask.

Is it worth repairing rather than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.

Do you work in Pant-mawr?

Yes, we do. We send a technician to Pant-mawr for every job, and the price is the same as everywhere else.

Can you resurface a pink bath in white?

Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.

What affects the price in Pant-mawr

Prices start from £350. Each job gets its own fixed price. These are the things that affect it:

  • How many areas need work
  • How easy the damage is to reach
  • What the surface is made of
  • The colour and finish to match

A repair is priced on what needs doing, not where you live. The full price is agreed before you book.

Getting a price from pictures

You can generally get a fixed quote without us visiting. To help us price it:

  • Natural light rather than flash
  • The material, if you know it
  • Your postcode, so we can check dates
  • A coin or ruler next to the damage for scale

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.