Staffordshire · England
Bath Re-enamelling for Tompkin homes
Full bath re-enamelling and resurfacing at your home in Tompkin, with a one-year guarantee on every repair.
- Resurfacing from £350
- Lots of chips and rust spots
- Enamel that is lost its shine and feels rough
Bath re-enamelling at your home in Tompkin
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. If you’re dealing with thin, worn enamel in places and stains that won’t shift, we can help.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we will sort it.
- Where
- Tompkin (ST9)
- Region
- Staffordshire
- Cover
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
DIY kit or professional repair?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
What bath re-enamelling costs
Prices start from £350. There is no area surcharge for Tompkin. The price reflects:
- How many areas need work
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
- What the surface is made of
Compared with replacing, repairing usually costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Send photos for a quote
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Details of any past repairs
- What it’s made of, if you know
- The postcode, so we can plan the visit
- One picture of the whole bath
Most clients in Tompkin get their price from pictures. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Tompkin questions
Can I get a quote without a visit?
In nearly every case. If photos do not show enough, we will ask for another angle.
Can you repair something that is been repaired before?
Most of the time. Tell us what was done before and we will plan for it.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted.
Does re-enamelling smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
Do you cover Tompkin?
Yes. We work across the UK and travel to Tompkin and the rest of Staffordshire. Send us photos for a fixed quote, or call 0345 017 0787.
How do I book?
Send photos through the quote form or call 0345 017 0787.
Do you charge for travel?
There’s no separate call-out charge. Your fixed quote includes everything.
How do I get a price for bath re-enamelling in Tompkin?
Resurfacing from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Honest limits
A repair is not right for every job, for example:
- A bath that’s rusted through
- A cast iron or steel bath that’s cracked right through
- Leaks from fittings rather than the bath
Send us pictures and we’ll tell you honestly.
Materials we work on in Tompkin
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
What happens on the day
There is not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. The job generally runs to a full day, tidy-up included.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Before we arrive
- Mention any parking restrictions or tricky access
- Mention any earlier repairs or resurfacing
- Ensure the room can be ventilated
Ask for a price
Send us a picture of the damage and a wider shot of the whole item, and tell us you are in Tompkin, and we will come back with a fixed quote.
Related advice
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Where we work around Tompkin
Tompkin is about 3 miles east of Ford Green, in Staffordshire. Anywhere in ST9, we carry out the work at your property. We work in 512 places in Staffordshire, from the larger towns to small villages. You can also see our page for Manchester, about 29 miles away.
Jobs in ST9 work the same way as everywhere else we cover. Nearby, we also work in Cheddleton (2 miles east), Denford (2 miles north-east), Wetley Rocks (2 miles south-east), Armshead (2 miles south) and Longsdon (2 miles north). Within a short drive, we also cover Newcastle-under-Lyme (7 miles south-west), Longton (5 miles south), Stone (11 miles south), Leek (4 miles north-east), Biddulph (5 miles north-west) and Alsager (10 miles west).
What’s near Tompkin
Our customers here include homes close to Church of St Chad and Endon High School. Nearby you’ll also find Abbey Green (2.4 miles south-west) and St Edward's Hospital (2.4 miles north-east). For a walk, there is Coombes Valley RSPB reserve.
Do you need bath re-enamelling in Tompkin?
A dull surface stains and holds dirt, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.
Customers normally contact us about:
- Wear marks under the taps
- Stains that will not shift
- A bath that stays dull however much you clean it
- An outdated colour you’d like to change
Before you book anyone
- Aftercare advice
- Who will actually do the work
- What prep work is covered
- How long the guarantee is and what it covers
Why repair rather than replace?
A new bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Prices start from £350. A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
What you get with us
- A year’s guarantee on all work
- We will tell you if it’s not worth repairing
- No need to remove anything
- Usually one visit, start to finish
Take a look at our pricing and bath cost comparison.
Looking after it afterwards
So the finish stays in good condition:
- A dripping tap should be fixed promptly
- Stick to gentle, non-abrasive cleaners
- Do not use the bath until it has fully cured
- Do not let dyes or oils sit on the finish
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Towns and villages near Tompkin
What else we do in Tompkin
About our accreditations · Every repair comes with a one-year guarantee.
