Plymouth · England
Bath re-enamelling & resurfacing in Weston Mill, Plymouth
Fixed-price bath re-enamelling in Weston Mill and the surrounding area, generally in one visit and guaranteed for a year.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Several chips and rust patches
About our bath re-enamelling in Weston Mill
Resurfacing renews the whole surface of the bath without a refit. It’s the answer when the entire bath is tired rather than one spot. Whether it’s a coloured bath you want in white and chips and rust in more than one place, we can usually put it right.
Every repair comes with a one-year guarantee.
- Where
- Weston Mill (PL5, PL2)
- Area hub
- Plymouth
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
FAQs for Weston Mill
What happens after I send photos?
We look at the pictures and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.
Can you fix a peeling bath coating?
Normally, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Is there any odour?
There can be some smell while we work, which is why we ventilate. It fades as everything cures.
Can tenants book a repair?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
About Weston Mill
Weston Mill is about 1 mile north-west of North Prospect, in Plymouth. We agree a date that works for you, and you will know when to expect us, so you’re not left waiting in all day. We work in 59 places in Plymouth, from the larger towns to small villages.
Here we cover the PL5 and PL2 postcode area. From York Road, Moor Lane and Savage Road or anywhere nearby, we can come to you. Main roads around Weston Mill include the A3064, which makes travel easy. We also cover the places around Weston Mill: Barne Barton (1 mile west), Ham (1 mile east), North Prospect (1 mile south-east), Keyham (1 mile south) and Morice Town (1 mile south). Further out, we also cover Lipson (3 miles south-east), Burraton (3 miles north-west), Compton (3 miles east), Plympton St Maurice (6 miles east), Plymstock (5 miles south-east) and Efford (3 miles east).
Near you in Weston Mill
Typical jobs here are in homes near Central Park, Weston Mill Community Primary Academy and St Budeaux Library and the streets around them. Nearby too are Marine Academy Plymouth (0.6 miles north), Weston Mill Hotel (less than half a mile north-west), Marine Academy Detachment (0.6 miles north) and St Philip's Church (under half a mile north). There’s a railway station in Weston Mill itself: St Budeaux Ferry Road station. Further afield, we also cover the area around Armada Centre (2.3 miles south-east) and Plymouth General Hospital (1.6 miles south).
How we price bath re-enamelling
Prices start from £350. There’s no area surcharge for Weston Mill. What changes the price is:
- Doing more than one item at once
- How many areas need work
- The material and finish
- Previous DIY repairs that have to come out
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Send photos for a quote
We price nearly every job from photos. This is what we need:
- A coin beside the damage so we can judge size
- Natural light rather than flash
- One picture of the entire bath
- Where you are, by postcode
Most customers in Weston Mill get their price from photos. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Do you need bath re-enamelling in Weston Mill?
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
Send us a photo if you notice any of these:
- Brown or grey marks that don’t clean off
- Chips and rust in more than one place
- A roll-top that’s seen better days
- An old resurfacing that’s failing
What to look for in a quote
- A fixed quote, and whether VAT is included
- Who turns up on the day
- What prep work is covered
- How the room is protected while they work
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
What we do, step by step
Your technician turns up when we said we would, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before any work starts. The work itself takes a full day, and the room is left clean and tidy.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Have somewhere for us to park nearby if possible
- Mention any earlier repairs or resurfacing
- Ensure the area is dry
Getting a price
The quickest way to a price is to send two or three photos using our quote form or call us. We’ll say immediately whether it can be repaired.
Related advice
Repair or replace: which is better?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. A repair usually costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Why Weston Mill customers choose us
- Dust sheets down, tidy finish
- One-year guarantee on every repair
- One visit for most repairs
- Colours mixed by hand to suit your surface
Read our prices page and resurfacing vs replacement cost guide.
Landlords, agents and businesses in Weston Mill
We work for landlords, letting agents and housing providers in Weston Mill as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Places near Weston Mill
What else we do in Weston Mill
When we would advise against a repair
To be straight with you, some problems need a different fix:
- A metal bath with a through crack
- Steel that has corroded right through
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send photos and we will say what we think before booking.
Materials we repair
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Pressed steel baths
Aftercare tips
After the repair has cured, a few habits help it last:
- Repair dripping taps early
- Respect the curing time we give you
- Store bottles off the bath
- Rinse off hair dye, oils and bath bombs right away
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
About our accreditations · Every repair comes with a one-year guarantee.
