Plymouth · England
Bath Re-enamelling in Morice Town
Fixed-price bath re-enamelling in Morice Town and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Several chips and rust patches
What affects the price in Morice Town
Resurfacing from £350. We charge the same across the UK, including Morice Town. What changes the price is:
- Access to the area
- The material
- Unusual colours or finishes
- Previous DIY repairs that have to come out
We charge the same wherever you are, with no extra for Morice Town. What changes the price is the job itself: how much damage, what it’s made of and how many items.
How to get a fixed price
A couple of clear pictures is all it takes. It helps if you send:
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
- The material, if you know it
- A close-up of the damage, in focus
Email us pictures of the damage and one of the entire item, and tell us you are in Morice Town, and we will come back with a fixed quote.
How we handle bath re-enamelling in Morice Town
Resurfacing renews the entire surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. We regularly repair Victorian roll-tops, basins & shower trays and acrylic baths, and the jobs we see most are a period or roll-top bath worth keeping and wear marks under the taps.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Morice Town (PL2, PL1, PL3)
- Region
- Plymouth
- Warranty
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
The process
We work cleanly and quietly. Protection goes down first, then the work takes the best part of a day. Before we leave, we explain how soon it can be used and how to look after it.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
How to prepare
- Make sure the room can be ventilated
- Have somewhere for us to park nearby if possible
- Tell us if there are stairs or a lift
Get a quote
To get a price, send two or three photos through our quote form or call us. We’ll tell you honestly whether it can be repaired.
Related advice
Aftercare tips
It’s all simple stuff:
- Rinse off hair dye, oils and bath bombs right away
- Clean with a soft cloth and mild detergent
- A dripping tap should be fixed promptly
- Get any chip repaired quickly
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Repairing versus replacing in Morice Town
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. A repair typically costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Why book with us
- CHAS, Constructionline and SafeContractor accredited
- Fixed prices from your photos
- Rooms protected and left tidy
- One price list for the whole UK
Read our full price list or bath cost comparison.
Common questions in Morice Town
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Just add the extra items to your pictures and we’ll quote them together.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Will the bath be moved?
No. We resurface it in place, so nothing else is disturbed.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted before the end of a tenancy.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can you price it without visiting?
Normally, yes. A close-up and a wider photo are enough to give a fixed quote.
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Morice Town and the surrounding area
Morice Town is about 1 mile north-west of Stonehouse, in Plymouth. Jobs in Morice Town are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Our technicians cover 59 places in Plymouth, from the larger towns to small villages.
All of PL2, PL1 and PL3 is within our area, from the main roads to the quietest streets. Local streets include Gun Lane, Ferry Road and Ryder Road, all of which we cover. If you’re just outside Morice Town, we cover Keyham (1 mile north), Stoke (1 mile east), Ford (1 mile east), Stonehouse (1 mile south-east) and Millbridge (1 mile east). Within a short drive, we also cover Burraton (3 miles north-west), Compton (3 miles east), Plympton St Maurice (6 miles east), Plymstock (4 miles east), Efford (3 miles east) and Sherford (6 miles east).
Local landmarks in Morice Town
Around Morice Town, we work in homes near UTC Plymouth, Devonport Library and Devonport Park and the streets around them. Also close by are St Michael (under half a mile east), The Albert pub (within half a mile east), UTC Plymouth (under half a mile south-east) and Morice Town Primary Academy (within half a mile north). There is a railway station in Morice Town itself: Dockyard station. Nearby you will also find Plymouth Castle (2.2 miles south-east) and Plymouth General Hospital (within half a mile south-west). The countryside around Morice Town includes Penlee Battery.
When a repair is not the answer
We won’t take on work that will not last, so here’s what a repair can’t put right:
- Leaks from fittings rather than the bath
- Steel that has corroded right through
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send pictures and we’ll give you a straight answer before booking.
Surfaces we repair
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
When to call us in Morice Town
Many baths we resurface have simply been well used, and only the surface is worn. Underneath, a cast iron or steel bath is generally as strong as ever.
These are the problems we are asked about most:
- A dull, rough surface that will not come clean
- An original cast iron bath that needs restoring
- Lots of chips and rust spots
- An outdated colour you’d like to change
Before you book anyone
- How to care for the finish
- Who turns up on the day
- What prep work is covered
- Whether there are any call-out or travel charges
Places near Morice Town
More services for Morice Town
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
About our accreditations · Every repair comes with a one-year guarantee.
