Plymouth · England
Bath Re-enamelling in Milehouse
Bath re-enamelling in Milehouse without the cost of replacing. Send us photos for a fixed price, then book a visit.
- Resurfacing from £350
- A roll-top that is seen better days
- A dull, rough surface that will not come clean
Bath re-enamelling at your home in Milehouse
When a bath is structurally fine but worn out on the surface, re-enamelling is normally the most cost-effective option. It avoids removal, plumbing and re-tiling. We regularly repair cast iron baths, acrylic baths and basins & shower trays, and people most frequently call us about worn patches where water runs and sits and an old resurfacing that’s failing.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will come back.
- Where
- Milehouse (PL2, PL3, PL1)
- Region
- Plymouth
- Warranty
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace: which is better?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing usually wins. Prices start from £350. A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why Milehouse clients choose us
- Straight answers about what a repair can do
- One-year guarantee on every repair
- One visit for most repairs
- A fixed quote before you book
Take a look at our pricing and resurfacing vs replacement cost guide.
Do you need bath re-enamelling in Milehouse?
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use dull the surface, generally first under the taps and around the waste.
Common reasons people in Milehouse contact us are:
- A coloured bath you want in white
- An old resurfacing that’s failing
- Enamel that is lost its shine and feels rough
- Thin, worn enamel in places
What your quote should include
- Aftercare advice
- Whether the colour is mixed to match
- What happens if they find more damage
- Whether the price covers travel
Places near Milehouse
Other services in Milehouse
What happens on the day
Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and get going once we have agreed what we are doing. It typically takes most of the day, and you are welcome to carry on with your day while we work.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
How to prepare
- Mention if the room is upstairs or in a flat
- Keep a parking space free if you can
- Mention any parking restrictions or tricky access
Ask for a price
Email us pictures of the damage and a wider shot of the entire item, and tell us you’re in Milehouse, and we will reply with a fixed quote.
Related advice
Where we work around Milehouse
Milehouse is about 1 mile north of Stonehouse, in Plymouth. Jobs in Milehouse are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Our repair technicians cover all 59 towns and villages across Plymouth.
All of PL2, PL3 and PL1 is covered, from the main roads to the quietest streets. Streets in the area include Alma Road, Scott Road and Lopes Road, and we cover them all. If you are just outside Milehouse, we cover Ford (1 mile south-west), North Prospect (1 mile north-west), Stoke (1 mile south-west), Peverell (1 mile east) and Millbridge (1 mile south). Further out, we also cover Burraton (4 miles north-west), Plympton St Maurice (5 miles east), Plymstock (4 miles south-east), Sherford (5 miles east), St Stephens (4 miles west) and Oreston (3 miles south-east).
Landmarks near Milehouse
Locally, our jobs take us to homes close to St Bartholomew, Central Park and North Prospect Library and the streets around them. Other local landmarks include Stoke Damerel Community College (within half a mile south-west), Montpelier Primary School (under half a mile north), City College Plymouth (1 mile south-west) and Britannia Inn (JD Wetherspoon) (within half a mile south-west). Milehouse’s nearest station is Plymouth station, about 0.8 miles south-east of the centre. Well-known places in the area include Elizabethan House Museum (1.6 miles south-east) and Plymouth Castle (1.7 miles south-east). For a walk, there’s Penlee Battery.
Looking after it afterwards
How the surface is treated afterwards matters:
- Do not use the bath until it has fully cured
- A dripping tap should be fixed promptly
- Stick to gentle, non-abrasive cleaners
- Do not let dyes or oils sit on the finish
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
When we’d advise against a repair
It helps to know what we can’t do too:
- A cast iron or steel bath that is cracked right through
- Plumbing leaks, which need a plumber
- Acrylic that moves when you stand in it
If in doubt, send pictures and we will say what we think.
Materials we repair
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
How we price bath re-enamelling
Resurfacing from £350. We charge the same across the UK, including Milehouse. What changes the price is:
- The material
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- How many items we do on one visit
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
How to get a fixed quote
Most quotes are done from photos alone. To make it quick:
- A clear, close picture of the problem area
- Something in shot to show the size
- Where you are, by postcode
- Any details about the material
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price without visiting.
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
FAQs for Milehouse
Can a failed resurfacing be redone?
Usually, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Can you repair something that is been repaired before?
In most cases. The old repair comes out first, so mention it when you send photos.
What happens after I send photos?
You’ll get a fixed quote back, plus dates. There is no obligation to book.
Can tenants book a repair?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Can landlords book you?
Yes, frequently. We can quote for several properties together and work between tenancies.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
About our accreditations · Every repair comes with a one-year guarantee.
