Hampshire · England

Bath re-enamelling & resurfacing in Weyhill, Hampshire

Problem with your bath in Weyhill? We repair it in place, match it on site and back it with a one-year guarantee.

  • Resurfacing from £350
  • A bath that stays dull however much you clean it
  • A roll-top that’s seen better days
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Weyhill?

Bath re-enamelling in Weyhill without replacing anything

Most baths are re-enamelled in a day, with the bath ready to use the following day. Nothing is disconnected or removed. We work on cast iron baths, pressed steel baths and acrylic baths, and the jobs we see most are several chips and rust patches and a coating lifting around the plughole.

We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.

Area
Weyhill (SP11)
County
Hampshire
Cover
One year on every repair
Price
From £350. Free and fixed, from your pictures
Call
0345 017 0787
Page updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

What your bath is made of matters

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.

Acrylic

Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.

Honest limits

A few problems are outside what a surface repair can do:

  • Leaks from fittings rather than the bath
  • A bath that’s rusted through
  • Problems we cannot see until an old finish comes off

Not sure? Send pictures and we will give you a straight answer.

Materials we work on in Weyhill

  • Basins & shower trays
  • Victorian roll-tops
  • Acrylic baths
  • Pressed steel baths
  • Cast iron baths

What we’re called out for in Weyhill

Older baths often have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.

It’s worth getting a quote if you see:

  • A peeling or bubbling previous coating
  • Enamel that is lost its shine and feels rough
  • Stains that will not shift
  • Wear marks under the taps

Questions to ask before booking

  • What happens if they find more damage
  • Whether cleaning and preparation are in the price
  • How the colour is matched
  • How long it needs to cure

10 questions to ask before booking

Where we work around Weyhill

Weyhill is about 3 miles west of Andover, in Hampshire. Customers in Weyhill get the same service as everywhere else we cover: a fixed quote from your photos, and a technician at your door on the day. We cover all 683 towns and villages across Hampshire, from the larger towns to small villages. We work right across the region, from Weyhill to London (about 66 miles away).

Postcode districts we cover here: SP11. Whether you live on Michaelmas Drove, Ordnance Lane and Amesbury Road or a nearby road, we can come to you. Close by, we cover Mullenspond (1 mile south-west), Fyfield (1 mile west), East Cholderton (1 mile south-west), Thruxton (1 mile south-west) and Penton Grafton (1 mile north-east). Further out, we also cover Winchester (15 miles south-east), Andover (3 miles east), Hyde (15 miles south-east), Tidworth (5 miles west), Weeke (14 miles south-east) and Stanmore (15 miles south-east).

Local landmarks in Weyhill

Typical jobs here are in homes near Church of St Michael and All Angels and The Weyhill Fair pub, among other places. The nearest railway station is Andover station, roughly 2.9 miles east of the centre. Other landmarks nearby include Andover Museum (3.6 miles east) and Ludgershall Castle (4 miles north-west). Not far away are Quarley Hill and Anton Lakes.

Map of Weyhill © OpenStreetMap contributors

DIY repairs versus a professional job

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

Questions from Weyhill

Does someone need to be in?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Do you cover the whole of Hampshire?

We work UK-wide, so Weyhill is covered. Our prices are the same everywhere.

Do the materials smell?

There can be some smell while we work, so we ventilate the room. It fades as everything cures.

Does re-enamelling smell?

Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.

Does the bath have to be removed?

No, it stays where it is. We work on the bath in place, with the room masked and ventilated.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Can you price it without visiting?

Nearly always. If pictures do not show enough, we’ll ask for another angle.

How do I get a price for bath re-enamelling in Weyhill?

Resurfacing from £350. Because every job differs, we price from pictures. You’ll get a fixed figure before you book.

What bath re-enamelling costs

Resurfacing from £350. Every quote is fixed and free. What we look at:

  • Doing more than one item at once
  • What the surface is made of
  • The size and number of damaged areas
  • Access to the area

What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.

How to get a fixed quote

Before you send photos, a few simple things make all the difference:

  • A coin or ruler next to the damage for scale
  • The postcode, so we can plan the visit
  • One sharp close-up of the damage
  • Any earlier repairs or coatings

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.

What happens on the day

Visits start with a quick look at the job together. Next, we cover and mask everything nearby and we start. Allow the best part of a day.

  1. We mask and protect the room and ventilate it.
  2. Next we degrease the bath and fix chips and rust spots.
  3. We prepare the surface and apply a bonding primer.
  4. We spray on the new enamel finish in several coats.
  5. We leave it to cure, and it’s typically ready the day after.

How to prepare

  • Keep children and pets away from the room on the day
  • Tell us about any previous repairs or coatings
  • Have a window or extractor fan available

How to get a price

Email us photos of the damage and one of the whole item, and tell us you are in Weyhill, and we’ll come back with a fixed quote.

Get a free quote

Advice

For landlords and businesses

We’re used to working with agents and managing companies. Send the address, pictures and access details.

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

Repair or replace: which is better?

Replacing a bath can take several days across several trades. Resurfacing takes one technician and typically a day, and the bath is usable the day after. Prices start from £350. Set against the cost of replacement, a repair is typically a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

What you get with us

  • No need to remove anything
  • We come to you, anywhere in the UK
  • Generally one visit, start to finish
  • One price list for the whole UK

Read our prices page and resurfacing vs replacement cost guide.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.