Herefordshire · England
Bath Re-enamelling in White End
Bath re-enamelling across White End and nearby, normally in one visit.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Brown or grey marks that do not clean off
How we handle bath re-enamelling in White End
The bath stays where it is, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, with the bath ready to use the following day. Common call-outs are for stains that won’t shift and a dull, rough surface that won’t come clean, on Victorian roll-tops, basins & shower trays and pressed steel baths.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we will come back.
- Area
- White End (WR13)
- Area hub
- Herefordshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
About White End
White End is about 7 miles west of Tewkesbury, in Herefordshire. Our technicians come to customers in White End, so you don’t need to take anything anywhere. White End is one of 255 towns and villages in Herefordshire we cover. We work right across the region, from White End to Birmingham (about 37 miles away).
Here we cover the WR13 postcode area. Other places close to White End include Berrow (1 mile east), Birts Street (1 mile north), Castlemorton (2 miles north), Bromesberrow (2 miles west) and Drugger's End (3 miles north). We also work in nearby towns such as Ross-on-Wye (13 miles south-west), Ledbury (5 miles north-west), Merrivale (13 miles south-west), Bromyard (15 miles north-west), Colwall Stone (6 miles north) and Leigh Sinton (10 miles north).
Near you in White End
We visit homes around Pendock CofE Primary School and Church of St Faith, among other places. Other landmarks nearby include Bronsil Castle (3 miles north-west). Green spaces nearby include Raggedstone Hill and Hollybed Farm Meadows.
Towns and villages near White End
More services for White End
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, generally one day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Why White End clients choose us
- Honest advice, even when it means no job
- We leave the room as we found it
- Everything repaired in place
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our pricing and resurfacing vs replacement cost guide.
Common problems we fix in White End
Often the bath has just had decades of use, and only the surface is worn. The body of the bath is usually perfectly sound.
Typical reasons for a call-out include:
- Wear marks under the taps
- A roll-top that is seen better days
- Lots of chips and rust spots
- A coating lifting around the plughole
Comparing quotes
- When it can be used again
- Aftercare advice
- The length of the guarantee and what it covers
- What happens if they find more damage
When a repair isn’t the answer
We won’t take on work that will not last, so here’s what a repair cannot put right:
- Anything hidden under an old coating, until we remove it
- Acrylic that moves when you stand in it
- Leaks from fittings rather than the bath
Not sure? Send photos and we’ll give you a straight answer before booking.
What we work on
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
What we do, step by step
The work is clean and fairly quiet, so you can stay at home while we’re there. We protect the area first, then the work takes the best part of a day. At the end we talk you through the curing time and the aftercare.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can generally be used the day after.
Preparing for the visit
- Keep children and pets away from the room on the day
- Move bottles, mats and clutter away from the area
- Point us to the nearest place to park
Ask for a price
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Related advice
Work for landlords and builders
For anyone letting property in or around White End, we’ll quote for several properties at once. Send pictures for each one and we will price them together.
We regularly work with letting and managing agents. Send the address, photos and access details and we’ll arrange it.
Aftercare tips
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Get any chip repaired quickly
- Store bottles off the bath
- Use washing-up liquid and a soft cloth
- Leave the bath for the full curing time before using it
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Common questions in White End
Will the new finish last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
How do I book?
Use the quote form or ring 0345 017 0787.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.
About our accreditations · Every repair comes with a one-year guarantee.
