Lancashire · England
Bath re-enamelling & resurfacing in White Stake, Lancashire
Fixed-price bath re-enamelling in White Stake and the surrounding area, normally in one visit.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Staining under the taps and around the waste
Bath re-enamelling in White Stake, done in place
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the next day. Common call-outs are for a bath in a colour that no longer suits and a peeling or bubbling previous coating, on acrylic baths, Victorian roll-tops and pressed steel baths.
Every repair comes with a one-year guarantee, wherever you are in Lancashire.
- Location
- White Stake (PR4)
- Region
- Lancashire
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Do you need bath re-enamelling in White Stake?
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Keep an eye out for these signs:
- Lots of chips and rust spots
- A bath in a colour that no longer suits
- A period or roll-top bath worth keeping
- Brown or grey marks that don’t clean off
Comparing quotes
- Whether the colour is mixed to match
- Who will actually do the work
- What happens if the damage is worse than the pictures show
- How your room will be protected
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
How it works
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the job itself takes a full day. At the end we talk you through how soon it can be used and how to care for it.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Let us know if it has been repaired before
- Clear toiletries, mats and anything else from around the area
- Make sure the room can be ventilated
Get a quote
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed price. Quotes are free and you are under no obligation.
Related advice
About White Stake
White Stake is about 1 mile south of Penwortham, in Lancashire. From the centre of White Stake to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. White Stake is one of 482 places in Lancashire where we work. Our jobs stretch from White Stake to Liverpool (about 24 miles away).
Our visits in PR4 work the same way as everywhere else we cover. Whether you live on Pope Lane, Old Pope Lane and Cage Lane or a nearby road, a technician can come to you. Other places close to White Stake include New Gate (1 mile south-east), New Longton (1 mile south-west), Penwortham (1 mile north), Howick Cross (1 mile north-west) and Hutton (1 mile west). Larger places within reach include Preston (3 miles north-east), Chorley (7 miles south-east), Lytham St Anne's (11 miles west), Bamber Bridge (3 miles east), Accrington (15 miles east) and Leyland (3 miles south-east).
Local landmarks in White Stake
We visit homes around All Hallows Catholic High School, Penwortham Broad Oak Primary School and All Saints Church, among other places. Also close by are Miller Park (2 miles north-east) and The Plough Inn (0.7 miles north-east). The closest station to White Stake is Lostock Hall station, about 1.8 miles east of the centre. A little further out are Preston Royal Infirmary (3 miles north-east) and Fishergate Shopping Centre (2.2 miles north-east).
- Parks and local facilities nearby include Tulketh (2.5 miles north)
For landlords and businesses
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will arrange it.
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Looking after it afterwards
Most damage we see is avoidable. A few tips:
- Get any chip repaired quickly
- Repair dripping taps early
- Keep suction mats out of the bath
- Wipe the bath dry after use in hard water areas
Dry the bath after use if possible, particularly with hard water, and rinse off any bath products.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Nearby places to White Stake
Other services in White Stake
Your questions about bath re-enamelling in White Stake
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Will the new finish last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Can pets and children be at home?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
What a repair can’t fix
To be straight with you, there are a few things a repair won’t fix:
- Leaking taps or wastes (a plumber’s job)
- A poorly supported acrylic bath, until it’s firmed up
- Anything hidden under an old coating, until we remove it
If in doubt, send photos and we’ll say what we think before booking.
Surfaces we repair
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
What bath re-enamelling costs
Prices start from £350. We give every job a fixed quote from pictures. This is what makes a difference:
- The size and number of damaged areas
- Whether we combine several jobs
- How hard the colour is to match
- Previous DIY repairs that have to come out
What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before you book.
Getting a price from photos
Almost every job we do is priced from pictures. This is what we need:
- Whether it’s been repaired or coated before
- What it’s made of, if you know
- One picture of the entire bath
- A coin or ruler next to the damage for scale
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.
About our accreditations · Every repair comes with a one-year guarantee.
