Northumberland · England
Bath re-enamelling & resurfacing in Whitton, Northumberland
Damaged bath in Whitton? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Several chips and rust patches
- An old resurfacing that is failing
Bath re-enamelling in Whitton, done in place
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. If you are dealing with a peeling or bubbling previous coating and an original cast iron bath that needs restoring, we can help, whatever the material.
Every repair is covered by our one-year guarantee, wherever you are in Northumberland.
- Where
- Whitton (NE65)
- County
- Northumberland
- Cover
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
For landlords and businesses
We work for landlords, letting agents and housing providers in Whitton as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Also in Whitton
What we do, step by step
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. Most visits take the best part of a day, tidy-up included.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Let us know which floor the room is on
- Let us know if it has been repaired before
- Avoid using the area for a few hours before we arrive
Get a quote
For a price in Whitton, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
Repair or replace: which is better?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. We charge the same wherever you are, with no extra for Whitton. The job itself decides the price: the material, the amount of damage and how many items.
What you get with us
- Repair technicians who travel to you, UK-wide
- One-year guarantee on every repair
- Usually one visit, start to finish
- Same prices wherever you are
Take a look at our full price list or guide to resurfacing and replacement costs.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- An acrylic bath that flexes badly underfoot
- Steel that has corroded right through
- Leaks from fittings rather than the bath
If in doubt, send photos and we will say what we think before booking.
Materials we work on in Whitton
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
About Whitton
Whitton is about 13 miles north-west of Morpeth, in Northumberland. We travel to clients in Whitton and the surrounding area, so there’s no workshop to go to. Our technicians cover all 189 towns and villages across Northumberland. We work right across the region, from Whitton to Newcastle upon Tyne (24 miles away).
We cover every part of the NE65 postcode area and the streets around it. Local streets include Hillhead Road and Carterside Road, and we cover them all. Nearby, we also work in Rothbury (1 mile north), Newtown (1 mile west), Thropton (2 miles north-west), The Lee (3 miles south-east) and Longframlington (4 miles east). Within a short drive, we also cover Morpeth (13 miles south-east), Alnwick (11 miles north-east), Amble (13 miles east), Bullers Green (12 miles south-east), Ellington (15 miles south-east) and Pegswood (13 miles south-east).
Near you in Whitton
Locally, our jobs take us to homes close to Church of All Saints, Rothbury First School and Coquetvale Hotel. Other landmarks nearby include Cartington Castle at Cartington Farm (2.4 miles north-west) and Rothbury Community Hospital (less than half a mile north-west). Green spaces nearby include Rothbury Forest.
- Local facilities include Rothbury Urban District (under half a mile north)
Common questions in Whitton
What information do you need?
A close-up, a wider photo and your postcode. Then we will agree a date.
Can pets and children be at home?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
What areas do you cover?
Everywhere in the UK, Whitton included. There’s no extra charge for travel.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Is there a smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Can tenants book a repair?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
Do you need bath re-enamelling in Whitton?
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Common reasons people in Whitton contact us are:
- Several chips and rust patches
- Thin, worn enamel in places
- A dull, rough surface that will not come clean
- An outdated colour you’d like to change
Before booking anyone
- How your room will be protected
- What happens if they find more damage
- What the guarantee covers, and for how long
- How to care for the finish
How we price bath re-enamelling
Prices start from £350. Each job gets its own fixed price. These are the things that affect it:
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
- Where the damage is and how we get to it
- Doing more than one item at once
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Getting a price from photos
When you take your photos, these tips help us give you a firm price:
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
- A clear, close picture of the problem area
- Something in shot to show the size
Send us a photo of the damage and one of the entire item, and tell us you’re in Whitton, and we will reply with a fixed price.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Aftercare tips
Nothing complicated is needed:
- Don’t let dyes or oils sit on the finish
- Fix dripping taps quickly
- Stick to gentle, non-abrasive cleaners
- Keep suction mats out of the bath
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
About our accreditations · Every repair comes with a one-year guarantee.
