South Gloucestershire · England
Bath re-enamelling & resurfacing in Wick, South Gloucestershire
Bath re-enamelling for Wick, without a refit. Get a fixed quote from your pictures, then book a visit.
- Resurfacing from £350
- An old resurfacing that is failing
- A coloured bath you want in white
Should you replace it?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing normally wins. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Why us?
- No extra charge for your area
- Accredited with CHAS, Constructionline and SafeContractor
- No need to remove anything
- A year’s guarantee on all work
See our full price list or bath cost comparison.
Bath re-enamelling in Wick without replacing anything
Re-enamelling is a one-day job for most baths. Nothing is disconnected or removed. If you’re dealing with stains that won’t shift and a dull, rough surface that won’t come clean, we can help, on pressed steel baths, Victorian roll-tops and acrylic baths alike.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Area
- Wick (BS30)
- County
- South Gloucestershire
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Wick
Also in Wick
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.
Signs you need bath re-enamelling in Wick
A dull surface stains and holds dirt, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
Most people contact us after spotting something like this:
- Staining under the taps and around the waste
- Chips and rust in more than one place
- An original cast iron bath that needs restoring
- A bath that stays dull however much you clean it
What to look for in a quote
- A fixed price, and whether VAT is included
- How to care for the finish
- How your room will be protected
- When it can be used again
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Prices and what affects them
Prices start from £350. There’s no charge for travel to Wick. The price comes down to:
- How much damage there is
- What the surface is made of
- How easy the damage is to reach
- Any earlier repairs that need removing first
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Send pictures for a quote
We price nearly every job from pictures. This is what we need:
- One picture of the whole bath
- Natural light rather than flash
- Details of any past repairs
- The postcode, so we can plan the visit
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
What we do, step by step
Visits start with a quick look at the job together, so you know exactly what we’re doing. Next, we cover and mask everything nearby and the work begins. You can expect it to take a full day, and we will keep you posted as we go.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s normally ready the next day.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Move bottles, mats and clutter away from the area
- Keep children and pets away from the room on the day
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Read more
FAQs for Wick
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Can you resurface a pink bath in white?
Yes, most people go for white. Mention the colour you want when you send pictures.
Do you work in Wick?
We do. Technicians travel to Wick from across the region, and the price is the same as everywhere else.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and we’ll quote them together.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How do I get a price for bath re-enamelling in Wick?
Prices start from £350. We give a fixed price from your photos. Send a close-up and a picture of the whole item with your BS30 postcode.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room protected and ventilated.
Honest limits
A few problems are outside what a surface repair can do:
- An acrylic bath that flexes badly underfoot
- Damage hidden under a previous coating, until it’s stripped back
- Plumbing leaks, which need a plumber
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
For landlords and businesses
If you manage property in Wick, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Wick and the surrounding area
Wick is about 3 miles east of Kingswood, in South Gloucestershire. Whether you’re in the middle of Wick or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in all 110 towns and villages in South Gloucestershire. Our nearest city page is Birmingham, about 74 miles away.
We cover every part of BS30 and the streets around it. Streets in the area include Church Road, High Street and London Road, all of which we cover. Neighbouring places we cover include Bridgeyate (1 mile west), Abson (1 mile north), Doynton (1 mile north-east), Beach (1 mile south) and Siston (2 miles north-west). Larger places within reach include Kingswood (3 miles west), Mangotsfield (4 miles north-west), Yate (6 miles north), Fishponds (5 miles west), Bradley Stoke (7 miles north-west) and Thornbury (11 miles north).
Landmarks near Wick
Around Wick, we work in homes near Carpenter's Arms, Sir Bernard Lovell School and Church of St Bartholomew, among other places. Wick’s nearest station is Keynsham station, about 3.8 miles south-west of the centre. Nearby you’ll also find Cossham Memorial Hospital (3.7 miles west) and Willsbridge Castle (2.7 miles south-west). Green spaces nearby include Lodge Hill.
About our accreditations · Every repair comes with a one-year guarantee.
