South Gloucestershire · England
Bath Re-enamelling for Bridgeyate homes
Local bath re-enamelling for Bridgeyate: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Staining under the taps and around the waste
- Lots of chips and rust spots
Bath re-enamelling in Bridgeyate without replacing anything
Re-enamelling is a one-day job for most baths, and you can use the bath the next day. Taps, tiles, panels and plumbing all stay in place. Our technicians work on pressed steel baths, cast iron baths and Victorian roll-tops, and people most frequently call us about a coating lifting around the plughole and enamel that’s lost its shine and feels rough.
Every job is backed for twelve months in Bridgeyate and everywhere else. If something goes wrong with the work, we come back.
- Location
- Bridgeyate (BS30)
- Area hub
- South Gloucestershire
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Landlords, agents and businesses in Bridgeyate
For anyone letting property in or around Bridgeyate, we will quote for several properties at once. Send pictures for each one and we’ll price them together.
Housing associations and facilities teams use us for planned and reactive repairs in South Gloucestershire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Bridgeyate: your questions answered
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one.
Can you fix a peeling bath coating?
Usually, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
What happens after I send photos?
We look at the photos and reply with a fixed price and some dates. If we need another angle, we’ll ask.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Is repairing better than replacing?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, with no extra for Bridgeyate. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why us?
- No extra charge for your area
- Colours mixed by hand to suit your surface
- Everything repaired in place
- Work done at your home or business
Take a look at our prices page or guide to resurfacing and replacement costs.
Prices and what affects them
Prices start from £350. We give every job a fixed price from photos. This is what makes a difference:
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
- What the surface is made of
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Send pictures for a quote
Almost every job we do is priced from pictures. This is what we need:
- Something in shot to show the size
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
- Details of any past repairs
Email us photos of the damage and a wider shot of the entire item, with your BS30 postcode, and we will come back with a fixed quote.
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Where we work around Bridgeyate
Bridgeyate is about 2 miles east of Kingswood, in South Gloucestershire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Bridgeyate is one of 110 towns and villages in South Gloucestershire where we work. You can also see our page for Birmingham, about 74 miles away.
All of BS30 is covered. Whether you live on London Road and Cann Lane or a nearby road, a technician can come to you. Close by, we cover North Common (1 mile south-west), Warmley (1 mile west), Wick (1 mile east), Siston (1 mile north) and Oldland (1 mile south-west). Within a short drive, we also cover Mangotsfield (3 miles north-west), Yate (6 miles north), Fishponds (4 miles north-west), Bradley Stoke (7 miles north-west), Thornbury (11 miles north) and Patchway (7 miles north-west).
Local landmarks in Bridgeyate
Locally, our jobs take us to homes close to The Griffin Public House, Church of St Barnabas and Digitech Studio School, among other places. Nearby too are Digitech Studio School (1 mile west) and Wick Church of England Primary School (0.8 miles east). The closest station to Bridgeyate is Keynsham station, roughly 3.2 miles south-west. Nearby you will also find Willsbridge Castle (2.1 miles south-west) and Cossham Memorial Hospital (2.8 miles west). Not far away are Lodge Hill.
Towns and villages near Bridgeyate
More services for Bridgeyate
When to call us in Bridgeyate
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, generally first under the taps and around the waste.
Signs it’s time to call us include:
- Enamel that’s lost its shine and feels rough
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
- A coating lifting around the plughole
What to look for in a quote
- How the room is protected while they work
- How to look after the finish
- The length of the guarantee and what it covers
- A fixed price, and whether VAT is included
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Fix dripping taps quickly
- Get any chip repaired quickly
- Wipe the bath dry after use in hard water areas
- Stick to gentle, non-abrasive cleaners
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
The process
There is not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. The job generally runs to the best part of a day, including clearing up.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Let us know if it has been repaired before
- Let us know which floor the room is on
Get a quote
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed quote. There’s no charge for the quote and you’re under no obligation.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
