Hampshire · England
Bath Re-enamelling for Wildhern homes
Bath re-enamelling for Wildhern, without a refit. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- A roll-top that’s seen better days
About our bath re-enamelling in Wildhern
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Typical jobs include a bath in a colour that no longer suits and a bath that stays dull however much you clean it, across basins & shower trays, pressed steel baths and Victorian roll-tops.
Every job is backed for twelve months in Wildhern and everywhere else. We return to put right any problem with the work.
- Area
- Wildhern (SP11)
- Area hub
- Hampshire
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Common problems we fix in Wildhern
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Typical reasons for a call-out include:
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
- A bath that stays dull however much you clean it
- A coloured bath you want in white
Comparing quotes
- How soon you can use it again
- Is the price fixed, and does it include VAT?
- What happens if the damage is worse than the pictures show
- What prep work is covered
Other services in Wildhern
How we price bath re-enamelling
Resurfacing from £350. There is no area surcharge for Wildhern. What changes the price is:
- The type of damage
- Access to the area
- Unusual colours or finishes
- Doing more than one item at once
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before you book.
Send pictures for a quote
Before you send photos, a few simple things make all the difference:
- What it’s made of, if you know
- Details of any past repairs
- A coin beside the damage so we can judge size
- The postcode, so we can plan the visit
The quickest way to a price is to send two or three pictures using our quote form or ring us. We will say right away if a repair is the right fix.
Our work in Wildhern
Wildhern is about 3 miles north of Andover, in Hampshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so there is no waiting around. Our repair technicians cover 683 places across Hampshire, from the larger towns to small villages. Our jobs stretch from Wildhern to London (63 miles away).
Jobs in SP11 are booked in the same way as anywhere else. If you are just outside Wildhern, we cover Upper Enham (1 mile south-east), Enham Alamein (1 mile south-east), Little London (2 miles east), Knights Enham (2 miles south-east) and Smannell (2 miles south-east). We also work in nearby towns such as Andover (3 miles south), Hyde (15 miles south-east), Tidworth (7 miles west), Weeke (15 miles south-east), Kempshott (15 miles east) and Ludgershall (5 miles west).
Local landmarks in Wildhern
Our clients here include homes close to Christchurch, Hatherden Church of England Primary School and The Hare & Hounds pub, among other places. The closest station to Wildhern is Andover station, about 3.1 miles south. Nearby you’ll also find Finkley Down Farm Museum (3.1 miles south-east) and Andover War Memorial Hospital (2.8 miles south). The countryside around Wildhern includes Anton Lakes and Mill Lake.
How the visit works
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes the best part of a day. If anything looks different from your photos, we’ll talk to you before going ahead.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can usually be used the day after.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Tell us about any previous repairs or coatings
- Plan for the room to be out of bounds to pets and children
How to get a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Read more
Landlord and trade work in Wildhern
For anyone letting property in or around Wildhern, we can repair and quote for several addresses together. Send pictures for each one and we’ll come back with a combined price.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
DIY repairs versus a professional job
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Aftercare tips
It’s all simple stuff:
- Get any chip repaired quickly
- Use washing-up liquid and a soft cloth
- Repair dripping taps early
- Respect the curing time we give you
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Wildhern questions
Will there be a smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum.
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Is the work guaranteed?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Can you repair something that is been repaired before?
Yes, we often do. It can add a little time, which we include in the quote.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders in Wildhern.
When we would advise against a repair
Some jobs aren’t right for a repair, for example:
- A bath that is rusted through
- Leaks from fittings rather than the bath
- Acrylic that moves when you stand in it
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
