Kent · England
Bath re-enamelling & resurfacing in Wingham, Kent
Bath re-enamelling in Wingham without the cost of replacing. Get a fixed quote from your photos, then we come to you.
- Resurfacing from £350
- Wear marks under the taps
- A dull, rough surface that will not come clean
About our bath re-enamelling in Wingham
We don’t move the bath, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. If you are dealing with chips and rust in more than one place and worn patches where water runs and sits, we can help, whatever the material.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.
- Where
- Wingham (CT3)
- Area hub
- Kent
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Wingham and nearby
Wingham is about 6 miles east of Canterbury, in Kent. Jobs in Wingham are booked in like any other job: a fixed quote from your pictures, and a technician at your door on the day. We cover 922 places in Kent. Our nearest city page is London, about 59 miles away.
Jobs in CT3 work the same way as everywhere else we cover. We regularly work on streets such as High Street, St Mary's Meadow and Harris's Alley. We also travel to Broomhill (1 mile north), Well Head (1 mile south-east), Wingham Green (1 mile west), Wingham Well (1 mile south-west) and Shatterling (1 mile north-east). Further out, we also cover Canterbury (6 miles west), Margate (10 miles north-east), Dover (10 miles south), Folkestone (13 miles south), Ramsgate (10 miles north-east) and Broadstairs (11 miles north-east).
Near you in Wingham
We visit homes around The Red Lion pub, St Mary's Church and Wingham Primary School, among other places. The closest station to Wingham is Adisham station, about 2.3 miles south of the centre. Other landmarks nearby include St Martins Hospital (4.7 miles west).
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Looking after it afterwards
So the finish stays in good condition for years:
- Dry the bath after use to stop limescale
- Have chips seen to early
- Keep toiletries on a shelf rather than in the bath
- Use washing-up liquid and a soft cloth
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Why repair rather than replace?
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Resurfacing renews the whole surface with the bath left where it is. Our bath re-enamelling starts from £350. The price reflects the work involved, not your postcode. The full price is agreed before you book, with no extras added later.
What you get with us
- Same prices wherever you are
- Straight answers about what a repair can do
- Accredited with CHAS, Constructionline and SafeContractor
- One-year guarantee on every repair
See our full price list and bath cost comparison.
Wingham questions
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send photos.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, access to the room.
What happens once I’ve sent pictures?
You’ll get a fixed quote back, plus dates. You’re under no obligation.
Can pets and children be at home?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Is repairing better than replacing?
Typically, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we will say so.
Is there any odour?
It depends on the job, but frequently a little. Open windows and an extractor fan help.
Are there extra charges for Wingham?
No. Our quotes include travel, with the same prices everywhere we work.
What we cannot put right
It helps to know what we cannot do too:
- Holes rusted through the metal
- Problems we cannot see until an old finish comes off
- A metal bath with a through crack
If in doubt, send pictures and we will say what we think.
Materials we work on in Wingham
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
Places near Wingham
What else we do in Wingham
How we price bath re-enamelling
Prices start from £350. Each job gets its own fixed price. This is what makes a difference:
- The size and number of damaged areas
- Any earlier repairs that need removing first
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
We charge the same wherever you are, with no extra for Wingham. What changes the price is the job itself: the material, the amount of damage and how many items.
Quotes from your pictures
You can normally get a fixed quote without us visiting. To help us price it:
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
- Details of any past repairs
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
Common problems we fix in Wingham
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Most people get in touch after spotting one of these:
- Several chips and rust patches
- An outdated colour you’d like to change
- Enamel that’s lost its shine and feels rough
- Staining under the taps and around the waste
What your quote should include
- What preparation is included
- What happens if the damage is worse than the photos show
- Whether the price is fixed and includes VAT
- Who will actually do the work
What happens on the day
We agree an arrival time beforehand. On site, it takes a full day in most cases. The room is left tidy and you will know when it can be used.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
How to prepare
- Mention any earlier repairs or resurfacing
- Clear the area around the damage
- Tell us if there are stairs or a lift
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
