East Riding of Yorkshire · England
Bath re-enamelling & resurfacing in Bilton, East Riding of Yorkshire
Local bath re-enamelling for Bilton: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- An outdated colour you’d like to change
- A coating lifting around the plughole
About our bath re-enamelling in Bilton
Resurfacing renews the whole surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. If you are dealing with enamel that’s lost its shine and feels rough and a coloured bath you want in white, we can help, whatever the material.
You get a one-year guarantee, the same in Bilton as everywhere else we work.
- Location
- Bilton (HU11)
- Area hub
- East Riding of Yorkshire
- Cover
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
More services for Bilton
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Repair or replace in Bilton?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why us?
- Same prices wherever you are
- Honest advice, even when it means no job
- Every repair guaranteed for a year
- Colour mixed on the day to match
Take a look at our pricing or resurfacing vs replacement cost guide.
What bath re-enamelling costs
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
- The material and finish
- Any earlier repairs that need removing first
There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed price
The better the pictures, the more accurate the price. Here’s what helps:
- A coin beside the damage so we can judge size
- One picture of the entire bath
- A clear, close picture of the problem area
- Whether it’s been repaired or coated before
For a price in Bilton, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Your questions about bath re-enamelling in Bilton
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Do you cover the whole of East Riding of Yorkshire?
Across the UK. Prices don’t change with location.
Is there any odour?
There may be a mild smell during the work that clears as it cures.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Can you quote from photos?
Normally, yes. A close-up and a wider photo are enough to give a fixed price.
Are there extra charges for Bilton?
No. Our quotes include travel, and we charge the same wherever you are.
How to care for the repair
Much of the damage we repair could have been avoided. These habits help:
- Don’t let dyes or oils sit on the finish
- Clean with a soft cloth and mild detergent
- Avoid suction-cup mats
- Do not leave a chip unrepaired
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
The process
We agree an arrival time beforehand, so you know when to expect us. On site, it takes the best part of a day for most jobs. We leave the room clean.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Move bottles, mats and clutter away from the area
- Have a window or extractor fan available
Ask for a price
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Related advice
About Bilton
Bilton is about 4 miles east of Kingston upon Hull, in East Riding of Yorkshire. Our repair technicians come to clients in Bilton, so you don’t need to take anything anywhere. We work in all 299 towns and villages across East Riding of Yorkshire. We work right across the region, from Bilton to Leeds (about 53 miles away).
Here we cover the HU11 postcode area. You will find streets such as St Peters View, Lime Tree Lane and Beech Avenue. Neighbouring places we cover include Longhill (1 mile west), Bilton Grange Estate (1 mile south-west), Ganstead (1 mile north-west), Wyton (1 mile east) and Marfleet (2 miles south). Larger places within reach include Beverley (9 miles north-west), Hessle (9 miles south-west), Cottingham (7 miles west), Hornsea (10 miles north), Brough (13 miles west) and Hedon (3 miles south-east).
Near you in Bilton
Around Bilton, we work in homes near The Crows Nest pub, Bilton Community Primary School and Wilberforce College, among other places. Other local landmarks include Church of St Peter (within half a mile south) and The Marvell College (0.8 miles south-west). Bilton’s nearest station is Hull station, roughly 4.8 miles south-west. Nearby you will also find Hedon Museum (3.3 miles south-east) and Burstwick Castle (4.6 miles south-east).
For landlords and businesses
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
What a repair can’t fix
It helps to know what we cannot do too:
- Steel that has corroded right through
- Anything hidden under an old coating, until we remove it
- Plumbing leaks, which need a plumber
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
About our accreditations · Every repair comes with a one-year guarantee.
