Hampshire · England
Bath re-enamelling & resurfacing in Woodside, Hampshire
Our technicians come to Woodside for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- An outdated colour you’d like to change
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
About our bath re-enamelling in Woodside
If your bath is sound but looks tired, re-enamelling is normally the most cost-effective option. There is no removal, plumbing or tiling involved. If you are dealing with a bath that stays dull however much you clean it and a peeling or bubbling previous coating, we can help, whatever the material.
Big or small, it’s backed by a one-year guarantee.
- Area
- Woodside (SP11)
- Region
- Hampshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlord and trade work in Woodside
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We work for landlords, letting agents and housing providers in Woodside as well as homeowners. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
Nearby places to Woodside
Other services in Woodside
What affects the price in Woodside
Resurfacing from £350. Prices are worked out job by job. The main factors are:
- Whether old repairs or coatings need taking off
- How hard the colour is to match
- How much damage there is
- How many items we do on one visit
Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
How to get a fixed price
Two or three clear photos are typically enough. It helps if you send:
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
- Something in shot to show the size
- Any earlier repairs or coatings
For a price in Woodside, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Covering Woodside
Woodside is about 7 miles north of Andover, in Hampshire. Book a date that suits you, and you will know when to expect us, so there’s no waiting around. Woodside is one of 683 places in Hampshire we cover. We work right across the region, from Woodside to London (63 miles away).
Jobs in SP11 are booked in the same way as anywhere else. We also cover the places around Woodside: Vernham Dean (1 mile east), Buttermere (3 miles north), Rivar (4 miles north), Shalbourne (4 miles north) and Ham (4 miles north). Larger places within reach include Andover (7 miles south), Tidworth (8 miles south-west), Ludgershall (6 miles south-west), Whitchurch (10 miles south-east), East Anton (6 miles south-east) and Overton (12 miles east).
Local landmarks in Woodside
Typical jobs here are in homes near Vernham Dean Gillum's Church of England Primary School, The George Inn and Church of St Mary. Open spaces near Woodside include Inkpen Hill.
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
When to call us in Woodside
A dull surface stains and holds dirt, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
Most people get in touch when they notice something like this:
- Chips and rust in more than one place
- A coating lifting around the plughole
- An outdated colour you’d like to change
- An original cast iron bath that needs restoring
Before you book anyone
- If travel is included in the price
- How soon you can use it again
- How to care for the finish
- What preparation is included
Looking after it afterwards
Nothing complicated is needed:
- Do not let dyes or oils sit on the finish
- Don’t use the bath until it has fully cured
- Stick to gentle, non-abrasive cleaners
- Avoid suction-cup mats
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Woodside questions
What do you need from me?
Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.
What areas do you cover?
Across the UK, so Woodside is covered. Prices don’t change with location.
Will the price change on the day?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
How long will the bath be out of use?
Most baths are done in a day, ready the day after. We will confirm timings when we quote.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Will there be fumes?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Acrylic that moves when you stand in it
- Holes rusted through the metal
- A metal bath with a through crack
Send us pictures and we’ll tell you honestly before booking.
Materials we work on in Woodside
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
How it works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which generally takes most of the day. If anything looks different from your photos, we will talk to you before going ahead.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the next day.
Getting ready for the visit
- Make sure the area is dry
- Let us know if it has been repaired before
- Clear toiletries, mats and anything else from around the area
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
