Kent · England
Bath re-enamelling & resurfacing in Woolage Village, Kent
Bath re-enamelling in Woolage Village without the cost of replacing. Send us pictures for a fixed price, then we come to you.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A coating lifting around the plughole
How we handle bath re-enamelling in Woolage Village
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Whether it’s a bath that stays dull however much you clean it and an outdated colour you’d like to change, we can generally put it right, on pressed steel baths, Victorian roll-tops and basins & shower trays alike.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Where
- Woolage Village (CT4)
- Region
- Kent
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
How it works
We turn up when we said we would and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. Most visits take most of the day, and the room is left clean and tidy.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Move bottles, mats and clutter away from the area
- Tell us if there are stairs or a lift
How to get a price
Send us a picture of the damage and one of the entire item, with your CT4 postcode, and we will reply with a fixed quote.
Read more
DIY kit or professional repair?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Also in Woolage Village
Our work in Woolage Village
Woolage Village is about 6 miles north-west of Dover, in Kent. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Woolage Village is one of 922 places in Kent we cover. Our nearest city page is London, about 59 miles away.
Here we cover the CT4 postcode area. Local streets include Nethersole Road, Firs Road and Forstal Road. We also cover the places around Woolage Village: Snowdown (1 mile north-east), Frogham (1 mile east), Nonington (2 miles north-east), Barfrestone (2 miles east) and Ratling (2 miles north). We also work in nearby towns such as Ashford (15 miles west), Canterbury (7 miles north-west), Margate (14 miles north-east), Dover (6 miles south-east), Folkestone (9 miles south) and Ramsgate (13 miles north-east).
Near you in Woolage Village
Locally, our jobs take us to homes close to Church of St Margaret and Two Sawyers Public House, among other places. The closest station to Woolage Village is Snowdown station, roughly 0.8 miles north-east.
Repair or replace in Woolage Village?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. A repair normally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Why book with us
- One visit for most repairs
- No extra charge for your area
- We come to you, anywhere in the UK
- No need to remove anything
See our prices page and resurfacing vs replacement cost guide.
How we price bath re-enamelling
Prices start from £350. Each job gets its own fixed price. These are the things that affect it:
- Whether we combine several jobs
- Where the damage is and how we get to it
- The material
- Whether it’s a chip, crack, burn or wear
Set against the cost of replacement, repairing typically costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Getting a price from photos
Before you send photos, these tips help us give you a firm price:
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
- Any details about the material
- Your postcode, so we can check dates
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Common problems we fix in Woolage Village
Often the bath has just had decades of use, and only the surface is worn. The body of the bath is usually perfectly sound.
If you can see any of these, send us a picture:
- A dull, rough surface that will not come clean
- A coating lifting around the plughole
- A coloured bath you want in white
- Wear marks under the taps
Before booking anyone
- Whether there are any call-out or travel charges
- How the colour is matched
- The length of the guarantee and what it covers
- Whether the price is fixed and includes VAT
When a repair is not the answer
A few problems are outside what a surface repair can do:
- Steel that has corroded right through
- Damage hidden under a previous coating, until it’s stripped back
- Leaking taps or wastes (a plumber’s job)
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
Landlord and trade work in Woolage Village
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll arrange it.
Woolage Village: your questions answered
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Just add the extra items to your pictures and you will get one combined price.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
Can pets and children be at home?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
How do I book?
Use the quote form or ring 0345 017 0787, and we will do the rest.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Do you cover the entire of Kent?
All of Kent, and the rest of the UK. There is no extra charge for travel.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
About our accreditations · Every repair comes with a one-year guarantee.
