Kent · England
Bath Re-enamelling for Barfrestone homes
Fixed-price bath re-enamelling in Barfrestone and the surrounding area, typically in one visit.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Wear marks under the taps
About our bath re-enamelling in Barfrestone
Resurfacing renews the entire surface of the bath without a refit. It’s the answer when the entire bath is tired rather than one spot. Our technicians work on pressed steel baths, basins & shower trays and acrylic baths, and the jobs we see most are an original cast iron bath that needs restoring and a coating lifting around the plughole.
Every repair comes with a one-year guarantee, wherever you are in Kent.
- Location
- Barfrestone (CT15)
- County
- Kent
- Guarantee
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What happens on the day
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which usually takes the best part of a day. If we find something your photos didn’t show, we’ll explain it before carrying on.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can generally be used the day after.
Before we arrive
- Mention any parking restrictions or tricky access
- Have a window or extractor fan available
- Mention if the room is upstairs or in a flat
Get a quote
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
Advice
Your questions about bath re-enamelling in Barfrestone
Can you repair something that’s been repaired before?
Generally, yes. Let us know what was used before.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
What areas do you cover?
All of Kent, and the rest of the UK. There is no extra charge for travel.
What happens after I send photos?
You will get a fixed quote back, normally with dates to choose from. There’s no obligation to book.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before you book.
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Barfrestone and nearby
Barfrestone is about 5 miles north-west of Dover, in Kent. Whether you are in the middle of Barfrestone or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Barfrestone is one of 922 places in Kent where we work. Our jobs stretch from Barfrestone to London (61 miles away).
Jobs in CT15 work the same way as everywhere else we cover. Other places close to Barfrestone include Frogham (1 mile north-west), Elvington (1 mile east), Nonington (1 mile north-west), Snowdown (2 miles north-west) and Woolage Village (2 miles west). Further out, we also cover Canterbury (9 miles north-west), Margate (14 miles north-east), Dover (5 miles south-east), Folkestone (9 miles south), Ramsgate (12 miles north-east) and Broadstairs (14 miles north-east).
Around Barfrestone
Typical jobs here are in homes near Church of St Nicholas and Eythorne Elvington Community Primary School. The closest station to Barfrestone is Shepherds Well station, about 1.3 miles south-west of the centre. Further afield, we also cover the area around Buckland Hospital (5.5 miles south-east).
What bath re-enamelling costs
Prices start from £350. You’ll know the full cost before booking. We look at:
- Where the damage is and how we get to it
- What kind of damage it is
- Previous DIY repairs that have to come out
- The material
Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access.
Send pictures for a quote
You can take the photos on your phone. Just ensure we can see:
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
- A close-up of the damage, in focus
- Where you are, by postcode
There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Should you replace it?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. We charge the same wherever you are, so there’s no premium for Barfrestone. What changes the price is the job itself: the material, the amount of damage and how many items.
Why book with us
- Most jobs done in one visit
- One price list for the entire UK
- Colours mixed by hand to suit your surface
- Straight answers about what a repair can do
See our full price list or resurfacing vs replacement cost guide.
Signs you need bath re-enamelling in Barfrestone
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
It’s worth getting a quote if you see:
- Chips and rust in more than one place
- A period or roll-top bath worth keeping
- A bath in a colour that no longer suits
- Enamel that’s lost its shine and feels rough
Comparing quotes
- What aftercare is recommended
- What preparation is included
- Who turns up on the day
- What happens if they find more damage
How to care for the repair
Much of the damage we repair could have been avoided. A few tips:
- Wipe the bath dry after use in hard water areas
- Stick to gentle, non-abrasive cleaners
- Avoid suction-cup mats
- Fix dripping taps quickly
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
What we can’t put right
In fairness, there are a few things a repair will not fix:
- Plumbing leaks, which need a plumber
- Steel that has corroded right through
- A bath split right through the body
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Nearby places to Barfrestone
What else we do in Barfrestone
About our accreditations · Every repair comes with a one-year guarantee.
