Lincolnshire · England
Bath re-enamelling & resurfacing in Wragby, Lincolnshire
Local bath re-enamelling for Wragby: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- Chips and rust in more than one place
Covering Wragby
Wragby is about 11 miles north-east of Lincoln, in Lincolnshire. We travel to homes and businesses in Wragby and the surrounding area, so you don’t need to take anything anywhere. We cover 732 places across Lincolnshire, from the larger towns to small villages. You can also see our page for Leeds, about 63 miles away.
We cover every part of LN8. You’ll find streets such as Market Place, Balmoral Close and Mill View Road, all of which we cover. Wragby sits on or near the A157 and A158, which makes travel easy. If you are just outside Wragby, we cover Holton cum Beckering (2 miles north-west), Bullington (2 miles west), East Barkwith (3 miles north-east), Lissington (4 miles north-west) and Snelland (4 miles north-west). We also work in nearby towns such as Lincoln (11 miles south-west), Louth (14 miles north-east), North Hykeham (14 miles south-west), Horncastle (10 miles south-east), Birchwood (13 miles west) and Woodhall Spa (10 miles south).
Landmarks near Wragby
In Wragby, that means homes near Wragby Primary School, Church of All Saints and The Ivy pub. Further afield, we also cover the area around Goltho Manor (1.1 miles west). Green spaces nearby include Snakeholme Pit.
Bath re-enamelling in Wragby without replacing anything
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, so we don’t cut corners on it. We regularly repair Victorian roll-tops, pressed steel baths and acrylic baths, and common reasons people get in touch are a roll-top that’s seen better days and thin, worn enamel in places.
Every repair is covered by a one-year guarantee, wherever you are in Lincolnshire.
- Where
- Wragby (LN8)
- Area hub
- Lincolnshire
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Towns and villages near Wragby
More services for Wragby
The process
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a full day, and we finish with a tidy-up and a look at the finished work together.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Move bottles, mats and clutter away from the area
- Let the surface dry out before the visit
- Open a window if you can
Get a quote
Send us a picture of the damage and a wider shot of the entire item, with your LN8 postcode, and we will come back with a fixed quote.
Advice
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and generally a day. Prices start from £350. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- Work done at your home or business
- Colours mixed by hand to suit your surface
- One-year guarantee on every repair
- Same prices wherever you are
See our prices page and resurfacing vs replacement cost guide.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
How we price bath re-enamelling
Resurfacing from £350. Quotes are free and the price is fixed. What we look at:
- How easy the damage is to reach
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
- The size and number of damaged areas
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Getting a price from photos
Before you send pictures, a few simple things make all the difference:
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
- The material, if you know it
- Something in shot to show the size
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
Common problems we fix in Wragby
Hard water speeds up the wear, and abrasive cleaners do the most damage.
People typically call us when they notice something like this:
- Chips and rust in more than one place
- Enamel that is lost its shine and feels rough
- A peeling or bubbling previous coating
- Brown or grey marks that do not clean off
What to look for in a quote
- What prep work is covered
- Aftercare advice
- What the guarantee covers, and for how long
- How the colour is matched
For landlords and businesses
If you manage property in Wragby, we will quote for several properties at once. Just send pictures for each address and we will price them together.
Housing associations and facilities teams use us for planned and reactive repairs in Lincolnshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- Use washing-up liquid and a soft cloth
- Leave the bath for the full curing time before using it
- A dripping tap should be fixed promptly
- Never use suction bath mats
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
FAQs for Wragby
Do the materials smell?
There may be a mild smell during the work that clears as it cures.
Which areas do you work in?
The entire UK, including all of Lincolnshire. Send your postcode with your photos and we’ll offer you dates.
Is there a smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and you’ll get one combined price.
Can pets and children be at home?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before.
Can you re-enamel a roll-top bath?
Yes, often. We resurface the inside, and the outside can be refinished too.
About our accreditations · Every repair comes with a one-year guarantee.
