Lancashire · England
Bath Re-enamelling for Wrea Green homes
Local bath re-enamelling for Wrea Green: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- An outdated colour you’d like to change
- A coating lifting around the plughole
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
About our bath re-enamelling in Wrea Green
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. Typical jobs include a dull, rough surface that won’t come clean and a coating lifting around the plughole, across cast iron baths, acrylic baths and basins & shower trays.
You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Location
- Wrea Green (PR4)
- Area hub
- Lancashire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What a repair cannot fix
We won’t take on work that will not last, so these are the limits:
- Anything hidden under an old coating, until we remove it
- A bath split right through the body
- Leaks from fittings rather than the bath
Send us photos and we’ll tell you honestly before booking.
Materials we work on in Wrea Green
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
What happens on the day
Once we’re through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes a full day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Keep pets and children out of the room while we work
- Let us know which floor the room is on
- Let us know about parking or access
Get a quote
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed quote back. There’s no charge for the quote and you are under no obligation.
Read more
Wrea Green and nearby
Wrea Green is about 4 miles north-east of Lytham St Anne's, in Lancashire. Clients in Wrea Green get the same service as everywhere else we cover: a fixed price from your pictures, then a visit to do the work. Wrea Green is one of 482 towns and villages in Lancashire where we work. Our nearest city page is Liverpool, about 26 miles away.
All of PR4 is covered. That includes homes on Station Road, Manor Way and Manor Road. We also cover the places around Wrea Green: Westby (1 mile west), Moss Side (1 mile south-west), Little Plumpton (1 mile north-west), Kellamergh (1 mile south) and Great Plumpton (1 mile north-west). Further out, we also cover Preston (9 miles east), Chorley (14 miles south-east), Lytham St Anne's (4 miles south-west), Bamber Bridge (11 miles east), Leyland (11 miles south-east) and Fulwood (8 miles east).
Local landmarks in Wrea Green
We visit homes around Ribby with Wrea Endowed CofE Primary School, St Nicholas' Church and Carr Hill High School and Sixth Form Centre and the streets around them. For rail, the closest station is Moss Side station, about 1.4 miles south-west. Well-known places in the area include Lytham Motive Power Museum (2.7 miles south-west) and Lytham Hospital (2.9 miles south-west). For a walk, there’s Marton Mere.
Should you replace it?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and usually a day, and the bath is usable the day after. Prices start from £350. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- One-year guarantee on every repair
- We will tell you if it’s not worth repairing
- Free fixed quotes from pictures
- One price list for the whole UK
See our prices page and bath cost comparison.
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Places near Wrea Green
What else we do in Wrea Green
Your questions about bath re-enamelling in Wrea Green
Can I add another job to the visit?
Yes, and it’s often cheaper. Send pictures of everything together and you’ll get one combined price.
Will the new finish last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
How long does re-enamelling take?
One day for most baths and can be used the day after. We will confirm timings when we quote.
Can a failed resurfacing be redone?
Normally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
What information do you need?
Use the quote form or ring 0345 017 0787, and we will take it from there.
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Do you need bath re-enamelling in Wrea Green?
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
If you can see any of these, send us a picture:
- Wear marks under the taps
- A bath that stays dull however much you clean it
- A coloured bath you want in white
- Staining under the taps and around the waste
Questions to ask before you book
- Whether a trained technician does the job
- Is the price fixed, and does it include VAT?
- How the room is protected while they work
- If travel is included in the price
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Keeping it looking good
Simple care helps the repair last. Our advice:
- Use washing-up liquid and a soft cloth
- Repair dripping taps early
- Keep toiletries on a shelf rather than in the bath
- Keep suction mats out of the bath
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
About our accreditations · Every repair comes with a one-year guarantee.
