Lancashire · England
Bath Re-enamelling for Lower Ballam homes
Bath re-enamelling across Lower Ballam and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Several chips and rust patches
Bath re-enamelling at your home in Lower Ballam
We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. We are frequently asked to fix stains that won’t shift and a coating lifting around the plughole, in cast iron baths, acrylic baths and Victorian roll-tops.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Location
- Lower Ballam (FY8)
- Region
- Lancashire
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Prices start from £350. We don’t charge extra for travel to Lower Ballam. The price comes down to:
- How many items we do on one visit
- Any earlier repairs that need removing first
- The material and finish
- Whether it’s a chip, crack, burn or wear
The price reflects the work involved, not where you live. You’ll see the full price before booking, with nothing added on the day.
How to get a fixed price
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Something in shot to show the size
- One sharp close-up of the damage
- The postcode, so we can plan the visit
- Natural light rather than flash
To get a price, send two or three photos using our quote form or ring us. We’ll say right away whether it can be repaired.
What we’re called out for in Lower Ballam
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Most people get in touch after spotting one of these:
- A coloured bath you want in white
- A period or roll-top bath worth keeping
- Worn patches where water runs and sits
- Brown or grey marks that do not clean off
What your quote should include
- How the room is protected while they work
- Is the price fixed, and does it include VAT?
- Whether there are any call-out or travel charges
- What the guarantee covers, and for how long
What a repair can’t fix
A few problems are outside what a surface repair can do:
- Plumbing leaks, which need a plumber
- Damage hidden under a previous coating, until it’s stripped back
- Holes rusted through the metal
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we repair
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
Repair or replace: which is better?
Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling renews the whole surface without moving it. Prices start from £350. Set against the cost of replacement, repairing normally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why choose Surface Doctor in Lower Ballam
- CHAS and Constructionline accredited
- Dust sheets down, tidy finish
- One price list for the entire UK
- Usually one visit, start to finish
See our full price list or guide to resurfacing and replacement costs.
Lower Ballam questions
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Is the work guaranteed?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
How do I book?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Our work in Lower Ballam
Lower Ballam is about 2 miles north-east of Lytham St Anne's, in Lancashire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Lower Ballam is one of 482 towns and villages in Lancashire where we work. You can also see our page for Liverpool, about 25 miles away.
Here we cover the FY8 postcode area. Close by, we cover Higher Ballam (1 mile south-west), Peel (1 mile north-west), Moss Side (1 mile east), Little Plumpton (1 mile north-east) and Westby (1 mile north-east). We also work in nearby towns such as Preston (11 miles east), Bamber Bridge (13 miles east), Leyland (12 miles south-east), Fulwood (10 miles east), Fleetwood (10 miles north) and Ormskirk (15 miles south).
Near you in Lower Ballam
Our customers here include homes close to St Bede's Catholic High School and St Matthew and the streets around them. Lower Ballam’s nearest station is Moss Side station, about 0.9 miles south-east. Well-known places in the area include Lytham Hospital (2.4 miles south) and Lytham Motive Power Museum (2.3 miles south-east). Not far away are Marton Mere.
DIY kit or professional repair?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
The process
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes the best part of a day. We tidy up before we leave and tell you when it’s ready to use.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Clear the area around the damage
- Make sure the room can be ventilated
- Mention any parking restrictions or tricky access
Getting a price
Most customers in Lower Ballam get their price from photos. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
Also near Lower Ballam
Other services in Lower Ballam
Work for landlords and builders
We work for landlords, letting agents and housing providers in Lower Ballam as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
About our accreditations · Every repair comes with a one-year guarantee.
