Lancashire · England
Bath re-enamelling & resurfacing in Moss Side, Lancashire
Problem with your bath in Moss Side? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A coloured bath you want in white
- A coating lifting around the plughole
Where we work around Moss Side
Moss Side is about 3 miles east of Lytham St Anne's, in Lancashire. Clients in Moss Side get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. Moss Side is one of 482 towns and villages in Lancashire we cover. You can also see our page for Liverpool, about 25 miles away.
Our technicians cover all of FY8 and the streets around it. Streets in the area include Moss Side Lane, Willowmead Park and Lytham Road, and we cover them all. Moss Side sits on or near the B5259, which makes travel easy. Neighbouring places we cover include Westby (1 mile north), Wrea Green (1 mile north-east), Kellamergh (1 mile south-east), Lower Ballam (1 mile west) and Little Plumpton (1 mile north). We also work in nearby towns such as Preston (10 miles east), Chorley (15 miles south-east), Lytham St Anne's (3 miles west), Bamber Bridge (11 miles east), Leyland (11 miles south-east) and Fulwood (9 miles east).
Landmarks near Moss Side
Locally, our jobs take us to homes close to Ribby with Wrea Endowed CofE Primary School, St Bede's Catholic High School and St Nicholas' Church. The closest station to Moss Side is Moss Side station, roughly 0.5 miles west. Well-known places in the area include Lytham Hospital (2.1 miles south) and Lytham Motive Power Museum (1.9 miles south). Not far away are Marton Mere.
How we handle bath re-enamelling in Moss Side
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. Typical jobs include brown or grey marks that don’t clean off and thin, worn enamel in places, across Victorian roll-tops, pressed steel baths and basins & shower trays.
You get a one-year guarantee, the same in Moss Side as everywhere else we work.
- Location
- Moss Side (FY8)
- Area hub
- Lancashire
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How to care for the repair
Nothing complicated is needed, just a few sensible habits:
- Keep suction mats out of the bath
- Do not leave bottles, razors or sponges standing on the surface
- Use washing-up liquid and a soft cloth
- Don’t leave a chip unrepaired
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
What bath re-enamelling costs
Prices start from £350. A fixed quote means you know the cost before you book. We take into account:
- How hard the colour is to match
- Whether we combine several jobs
- Previous DIY repairs that have to come out
- The material
The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Getting a price from pictures
Good pictures mean an accurate price. Here’s what helps:
- A coin beside the damage so we can judge size
- A wider photo showing the entire bath
- The material, if you know it
- Natural light rather than flash
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Places near Moss Side
Other services in Moss Side
Do you need bath re-enamelling in Moss Side?
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
It’s worth getting a quote if you see:
- An old resurfacing that’s failing
- Thin, worn enamel in places
- Lots of chips and rust spots
- A dull, rough surface that won’t come clean
Comparing quotes
- A fixed quote, and whether VAT is included
- How long it needs to cure
- How the room is protected while they work
- Whether there are any call-out or travel charges
Questions from Moss Side
Do you resurface freestanding baths?
Yes. Inside and out.
Do you cover the entire of Lancashire?
All of Lancashire, and the rest of the UK. There is no extra charge for travel.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
What happens if you find more damage?
We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Will the bath be moved?
No. We resurface it in place, so nothing else is disturbed.
Is there any odour?
Some materials have a smell while they’re applied. It fades as everything cures.
What do you need from me?
A close-up, a wider photo and your postcode. Then we will agree a date.
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
When a repair isn’t the answer
Before booking, it’s worth knowing the limits too:
- Plumbing leaks, which need a plumber
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Cast iron baths
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Why repair rather than replace?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. A repair usually costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
What you get with us
- One-year guarantee on every repair
- One price list for the whole UK
- CHAS and Constructionline accredited
- Nothing taken out or refitted
Take a look at our pricing and guide to resurfacing and replacement costs.
What we do, step by step
We work cleanly and quietly, so you can stay at home while we are there. Protection goes down first, then the work takes a full day. Before we leave, we explain the curing time and the aftercare.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s generally ready the following day.
Preparing for the visit
- Tell us if there are stairs or a lift
- Keep pets and children out of the room while we work
- Avoid using the area for a few hours before we arrive
Ask for a price
To get a price, send a couple of pictures through our quote form or call us. We will say straight away if a repair is the right fix.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
