Cumbria · England
Bath Re-enamelling for Wythop Mill homes
Full bath re-enamelling and resurfacing for homes and businesses in Wythop Mill and across Cumbria. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Lots of chips and rust spots
- Wear marks under the taps
About our bath re-enamelling in Wythop Mill
We re-enamel plenty of period and roll-top baths, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. Typical jobs include staining under the taps and around the waste and lots of chips and rust spots, across pressed steel baths, basins & shower trays and Victorian roll-tops.
All our work comes with a one-year guarantee, wherever you are in Cumbria.
- Location
- Wythop Mill (CA13)
- County
- Cumbria
- Cover
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
How we price bath re-enamelling
Resurfacing from £350. There is no charge for travel to Wythop Mill. The price comes down to:
- Doing more than one item at once
- The type of damage
- Access to the area
- What the surface is made of
The price reflects the work involved, not where you live. The full price is agreed before you book.
Getting a price from pictures
You can typically get a fixed price without us visiting. To help us price it:
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
- Something in shot to show the size
- One sharp close-up of the damage
The quickest way to a price is to send a couple of photos using our quote form or ring us. We will tell you honestly whether it can be repaired.
Landlords, agents and businesses in Wythop Mill
Landlords, letting agents and housing providers in Wythop Mill use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
For anyone letting property in or around Wythop Mill, we can repair and quote for several addresses together. Send photos for each one and we’ll price them together.
Repair or replace in Wythop Mill?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
What you get with us
- Rooms protected and left tidy
- Fixed prices from your photos
- CHAS, Constructionline and SafeContractor accredited
- Honest advice, even when it means no job
Take a look at our full price list or bath cost comparison.
Also near Wythop Mill
Also in Wythop Mill
How to care for the repair
Simple care helps the repair last. Our advice:
- Fix dripping taps quickly
- Stick to gentle, non-abrasive cleaners
- Dry the bath after use to stop limescale
- Do not leave bottles, razors or sponges standing on the surface
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Covering Wythop Mill
Wythop Mill is about 11 miles east of Workington, in Cumbria. From the centre of Wythop Mill to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover 438 places in Cumbria, from the larger towns to small villages. You can also see our page for Newcastle upon Tyne, about 69 miles away.
Postcode districts we cover here: CA13. Other places close to Wythop Mill include Cockermouth (3 miles west), Bassenthwaite (4 miles north-east), Papcastle (4 miles west), Braithwaite (5 miles south-east) and Eaglesfield (5 miles west). Within a short drive, we also cover Workington (11 miles west), Whitehaven (15 miles south-west), Maryport (9 miles north-west), Keswick (7 miles south-east), Moorclose (11 miles west) and Wigton (12 miles north).
Near you in Wythop Mill
Our clients here include homes close to St Margaret's Church, among other places. Well-known places in the area include The Cumberland Toy & Model Museum (3.5 miles west) and Cockermouth Castle (3.5 miles west). Not far away are Clints Crags and Bassenthwaite Lake.
Wythop Mill questions
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Is there any odour?
It depends on the job, but often a little. Open windows and an extractor fan help.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Will the price change on the day?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit generally costs less than separate visits. Include photos of each item.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, access to the room.
How long is the bath unusable?
Usually a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
What we do, step by step
Here’s how a visit generally runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Plan for most of the day from start to finish. Before we go, we’ll explain when it can be used and how to care for it.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Clear toiletries, mats and anything else from around the area
- Mention if the room is upstairs or in a flat
Getting a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Read more
Can I fix it myself?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
When a repair is not the answer
Some problems need a builder, plumber or fitter rather than us:
- A poorly supported acrylic bath, until it’s firmed up
- Anything hidden under an old coating, until we remove it
- A bath split right through the body
If in doubt, send pictures and we will say what we think.
Materials we work on in Wythop Mill
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
