Shropshire · England
Bath Re-enamelling in Yorton Heath
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Yorton Heath. Free, fixed quotes from your photos.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Lots of chips and rust spots
Bath re-enamelling in Yorton Heath without replacing anything
Resurfacing renews the whole surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. Our technicians work on Victorian roll-tops, acrylic baths and pressed steel baths, and the jobs we see most are thin, worn enamel in places and a dull, rough surface that won’t come clean.
Big or small, it’s backed by a one-year guarantee.
- Location
- Yorton Heath (SY4)
- County
- Shropshire
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Do you need bath re-enamelling in Yorton Heath?
Hard water speeds up the wear, and abrasive cleaners do the most damage.
The things customers generally mention when they call are:
- An outdated colour you’d like to change
- Several chips and rust patches
- A coating lifting around the plughole
- A roll-top that’s seen better days
What to look for in a quote
- Who will actually do the work
- What happens if they find more damage
- If travel is included in the price
- What aftercare is recommended
Towns and villages near Yorton Heath
More services for Yorton Heath
Prices and what affects them
Resurfacing from £350. We give every job a fixed quote from pictures. This is what makes a difference:
- Doing more than one item at once
- How many areas need work
- Any earlier repairs that need removing first
- The colour and finish to match
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
How to get a fixed quote
Good pictures mean an accurate price. Here’s what we find most useful:
- Natural light rather than flash
- Any details about the material
- One picture of the entire bath
- Any earlier repairs or coatings
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
FAQs for Yorton Heath
Do you charge for travel?
There’s no separate call-out charge. The fixed price covers the visit and the work.
Is there a guarantee?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Is a repair better than a new one?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Do the materials smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote with dates.
Which areas do you work in?
All of Shropshire, and the rest of the UK. There is no extra charge for travel.
How much does bath re-enamelling cost in Yorton Heath?
Prices start from £350. We give a fixed price from your photos. Send a close-up and a photo of the entire item and your postcode.
Does someone need to be in?
We need someone to let us in. You don’t need to watch us work.
Yorton Heath and nearby
Yorton Heath is about 6 miles north of Shrewsbury, in Shropshire. Book a date that suits you, and you’ll know when to expect us, so you are not left waiting in all day. Yorton Heath is one of 433 places in Shropshire we cover. Our nearest city page is Birmingham, about 42 miles away.
Jobs in SY4 work the same way as everywhere else we cover. If you are just outside Yorton Heath, we cover Sansaw Heath (1 mile east), Harmer Hill (1 mile west), Haston (1 mile south-east), Hadnall (2 miles south-east) and Preston Gubbals (2 miles south). Within a short drive, we also cover Shrewsbury (6 miles south), Oswestry (14 miles west), Market Drayton (13 miles north-east), Coleham (6 miles south), Kingsland (6 miles south) and Whitchurch (12 miles north).
Landmarks near Yorton Heath
In Yorton Heath, that means homes near Church of St Mary and The Red Castle pub, among other places. For rail, the closest station is Yorton station, roughly 0.9 miles north. Well-known places in the area include Myddle Castle (2.3 miles west).
What happens on the day
Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a full day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Let us know about parking or access
- Let us know which floor the room is on
- Point us to the nearest place to park
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Read more
Aftercare tips
So the finish stays in good condition:
- Use washing-up liquid and a soft cloth
- A quick wipe after use keeps limescale away
- Keep suction mats out of the bath
- Rinse off hair dye, oils and bath bombs straight away
Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
When a repair isn’t the answer
We won’t take on work that won’t last, so here’s what a repair can’t put right:
- Damage hidden under a previous coating, until it’s stripped back
- A cast iron or steel bath that’s cracked right through
- A poorly supported acrylic bath, until it’s firmed up
Send us photos and we’ll tell you honestly.
Materials we work on in Yorton Heath
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Landlords, agents and businesses in Yorton Heath
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Housing associations and facilities teams use us for planned and reactive repairs in Shropshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
About our accreditations · Every repair comes with a one-year guarantee.
