Derbyshire · England

Bath Repair for Donisthorpe homes

Bath repair across Donisthorpe and nearby, normally in one visit.

  • Repairs from £95
  • Rust by the waste and overflow
  • Chips under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Donisthorpe

About our bath repair in Donisthorpe

A typical bath repair is a few hours’ work, and you can typically bathe again the following day. You won’t need a plumber or tiler, because nothing is disconnected. We’re frequently asked to fix a cracked acrylic bath and rust spots around the plughole, on roll-top & freestanding, pressed steel enamel and cast iron enamel.

All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.

Location
Donisthorpe (DE12)
Region
Derbyshire
Warranty
One year on every repair
Price
From £95. Free, fixed quote from pictures
Telephone
0345 017 0787
Updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

Landlord and trade work in Donisthorpe

Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.

Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.

What a repair can’t fix

Before booking, it’s worth knowing the limits too:

  • A bath that moves underfoot, until its support is fixed
  • Leaks from the waste or overflow fittings (a plumber’s job)
  • Cracks in parts of an acrylic bath we can’t get to from below

If in doubt, send pictures and we’ll say what we think.

Materials we work on in Donisthorpe

  • Pressed steel enamel
  • Acrylic
  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Cast iron enamel

FAQs for Donisthorpe

How soon can you come?

It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.

What if the damage is worse than the photos show?

If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.

Do I have to be there?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Can a cracked acrylic bath be fixed?

Most of the time. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.

It’s been repaired before. Can you still fix it?

In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

When can I have a bath again?

Usually within a day, depending on the repair.

Can you price it without visiting?

In nearly every case. We only ask to see it in person if the pictures can’t show what we need.

How it works

Your technician turns up when we said we would and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. The work itself takes two to three hours for most chips, and the room is left clean and tidy.

  1. We start by looking at the damage and confirming the plan with you.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. We tint the finish by hand to match the bath.
  5. Finally, it’s polished to match the shine and left to cure.

Preparing for the visit

  • Move bottles, mats and clutter away from the area
  • Let us know about parking or access
  • Tell us if there are stairs or a lift

Getting a price

Send us photos of the damage and one of the entire item, with your DE12 postcode, and we’ll reply with a fixed quote.

Get a fixed price

Read more

Our work in Donisthorpe

Donisthorpe is about 3 miles south-west of Ashby-de-la-Zouch, in Derbyshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover all 532 towns and villages across Derbyshire. You can also see our page for Birmingham, about 23 miles away.

Every address in DE12 is covered, from the main roads to the quietest streets. Whether you live on New Street, Foxglove Avenue and Ivy Close or anywhere nearby, a technician can come to you. Nearby, we also work in Short Heath (1 mile north-west), Oakthorpe (1 mile south-east), Acresford (1 mile south-west), Moira (1 mile north-east) and Overseal (1 mile north-west). Further out, we also cover Swadlincote (4 miles north), Woodville (3 miles north), Upper Midway (4 miles north), Hilton (11 miles north), Midway (4 miles north) and Lower Midway (4 miles north).

Local landmarks in Donisthorpe

Locally, our jobs take us to homes close to Halfway House, Donisthorpe Primary School and Church of St John the Evangelist, among other places. Well-known places in the area include Ashby de la Zouch Castle (3.4 miles north-east) and Moira Furnace Museum (0.6 miles north).

Map of Donisthorpe © OpenStreetMap contributors

Keeping it looking good

So the finish stays in good condition:

  • Get any new chip repaired before it rusts
  • If an acrylic bath flexes, have its feet adjusted
  • Keep metal cans and razors off the surface
  • Cover the bath during DIY or decorating

There’s nothing special to do after a repair. Skip bleach and gritty creams and give it a rinse after each bath.

Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Take it off before we arrive.

Different materials, different repairs

Cast iron

Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Repair or replace in Donisthorpe?

For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it takes one visit, and the bathroom stays exactly as it is. Prices start from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.

What you get with us

  • Most jobs done in one visit
  • Same prices wherever you are
  • Dust sheets down, tidy finish
  • Colour mixed on the day to match

Read our pricing or guide to resurfacing and replacement costs.

Prices and what affects them

Prices start from £95. We give every job a fixed quote from photos. This is what makes a difference:

  • Where the damage is and how we get to it
  • Unusual colours or finishes
  • How many areas need work
  • What the surface is made of

What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.

Getting a price from pictures

When you take your pictures, a few simple things make all the difference:

  • Natural light rather than flash
  • A close-up of the damage, in focus
  • The postcode, so we can plan the visit
  • A coin beside the damage so we can judge size

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

Signs you need bath repair in Donisthorpe

Dropped items cause the majority of chips, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.

If you can see any of these, send us a picture:

  • Rust spots around the plughole
  • Scratches you can feel with a fingernail
  • Impact holes in acrylic
  • Chips under the taps

Before booking anyone

  • How your room will be protected
  • How long it needs to cure
  • How long the guarantee is and what it covers
  • Whether a trained technician does the job

How to compare quotes

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.