Staffordshire · England
Bath Repair for Acton Trussell homes
Damaged bath in Acton Trussell? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- An old repair that has yellowed or come loose
- Deep scratches in acrylic
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Bath repair in Acton Trussell without replacing anything
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. There is no plumbing to disconnect, your tiles stay as they are, and the finish is matched to the rest of the bath. We regularly repair cast iron enamel, roll-top & freestanding and whirlpool & spa baths, and common reasons people get in touch are a chip where the taps sit and a kit repair that didn’t last.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Where
- Acton Trussell (ST17)
- County
- Staffordshire
- Cover
- One year on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What we do, step by step
We begin by going over the job with you, so you know exactly what we are doing. Next, we cover and mask everything nearby and the work begins. You can expect it to take a morning or an afternoon, and we will keep you posted as we go.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can typically use the bath the next day.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Plan for the room to be out of bounds to pets and children
- Point us to the nearest place to park
Getting a price
For a price in Acton Trussell, the easiest route is pictures: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Advice
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Get any new chip repaired before it rusts
- Don’t leave razors or cans standing in the bath
- Fix dripping taps early to stop staining and limescale
- Rinse the bath after use, especially in hard water areas
Look after the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and it can start to leak underneath.
Repairs by material
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Common questions in Acton Trussell
Do you work in Acton Trussell?
Yes, we do. We send a technician to Acton Trussell for every job, with no extra charge for travel.
How do I get a price for bath repair in Acton Trussell?
Prices start from £95. We give a fixed quote from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Can you redo an old repair?
Regularly. We strip it out, deal with any rust and repair it again.
When can I have a bath again?
Most baths can be used the following day. We’ll tell you the exact curing time when we finish.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Will the repair show?
On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Can you redo someone else’s repair?
Normally, yes. The old repair comes out first, so let us know about it.
Landlord and trade work in Acton Trussell
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
We are used to working with agents and managing companies. Send the address, photos and access details and we will arrange it.
What we are called out for in Acton Trussell
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
Clients normally contact us about:
- A failed DIY repair that’s discoloured or lifting
- Holes from dropped items
- Scuffs and scratches in the surface
- Rusty patches near the plughole
Before you book anyone
- How changes to the job are handled
- How soon you can use it again
- How your room will be protected
- What aftercare is recommended
Honest limits
Before booking, it’s worth knowing the limits too:
- Metal that has corroded all the way through
- Water coming from the waste or taps rather than the bath
- A bath that moves underfoot, until its support is fixed
Send us pictures and we’ll tell you honestly before you book.
What we work on
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
Repairing versus replacing in Acton Trussell
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Our bath repair starts from £95. A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with no extras added later.
Why book with us
- Everything repaired in place
- Colour mixed on the day to match
- Rooms protected and left tidy
- No extra charge for your area
See our prices page or bath cost comparison.
Also near Acton Trussell
Also in Acton Trussell
Where we work around Acton Trussell
Acton Trussell is about 3 miles south of Stafford, in Staffordshire. From the centre of Acton Trussell to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Acton Trussell is one of 512 towns and villages in Staffordshire we cover. You can also see our page for Birmingham, about 22 miles away.
We cover every part of the ST17 postcode area and the streets around it. From Top Road, Leese Lane and Trussell Close or anywhere nearby, a technician can come to you. Neighbouring places we cover include Bednall (1 mile east), Bednall Head (2 miles east), Brocton (2 miles east), Berkswich (2 miles north-east) and Walton-on-the-Hill (2 miles north-east). We also work in nearby towns such as Stafford (3 miles north), Cannock (6 miles south-east), Lichfield (13 miles south-east), Rugeley (7 miles east), Burntwood (9 miles south-east) and Stone (10 miles north).
Around Acton Trussell
Typical jobs here are in homes near Stafford Manor High School, Church of St James and St Leonard's CofE (C) First School and the streets around them. For rail, the closest station is Penkridge station, roughly 2.8 miles south of the centre. Well-known places in the area include Stafford Hospital (3.5 miles north) and Stafford Castle (3.3 miles north-west). Open spaces near Acton Trussell include Tixall Wide and Radford Meadows.
About our accreditations · Every repair comes with a one-year guarantee.
