Staffordshire · England
Bath Repair in Queensville
Problem with your bath in Queensville? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Rust spots around the plughole
- A chipped rim or side
What happens on the day
The work is clean and fairly quiet, so you can stay at home while we are there. We protect the area first, then the job itself takes a morning or an afternoon. At the end we talk you through how soon it can be used and how to look after it.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Let us know if it has been repaired before
- Plan for the room to be out of bounds to pets and children
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.
Read more
Bath repair in Queensville without replacing anything
Whatever the damage, the aim is the same: a repair that’s smooth, sound and hard to spot. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. We work on pressed steel enamel, acrylic and whirlpool & spa baths, and people most often call us about holes from dropped items and cracks in an acrylic bath.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Location
- Queensville (ST17, ST16)
- Region
- Staffordshire
- Guarantee
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Places near Queensville
What else we do in Queensville
Queensville questions
Is there any odour?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
What information do you need?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
How much does bath repair cost in Queensville?
Prices start from £95. We give a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo with your ST17 postcode.
Do you cover Queensville?
Yes. We cover the whole UK and come to Queensville and the rest of Staffordshire. Send photos and we will quote, or call 0345 017 0787.
When a repair isn’t the answer
Honesty matters more than a booking, so here’s what a repair will not do:
- Cracks in acrylic we cannot reach from underneath
- Flexing caused by a failed cradle or loose feet
- Metal that has corroded all the way through
If in doubt, send photos and we will say what we think before you book.
What we work on
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
Repairing versus replacing in Queensville
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. Repairing it leaves it where it is. Prices start from £95. Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access.
Why choose Surface Doctor in Queensville
- We leave the room as we found it
- Honest advice, even when it means no job
- Everything repaired in place
- Colour mixed on the day to match
Take a look at our full price list and resurfacing vs replacement cost guide.
How we price bath repair
Repairs from £95. You will know the full cost before booking. We take into account:
- The material
- Where the damage is and how we get to it
- How hard the colour is to match
- How many items we do on one visit
We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from pictures
Photographing the damage takes a minute, and it saves a visit. Please include:
- Any details about the material
- Good light, ideally daylight, without flash glare
- Your postcode, so we can check dates
- A wider photo showing the whole bath
Upload photos of the damage and a wider shot of the whole item, and tell us you are in Queensville, and we’ll reply with a fixed price.
For landlords and businesses
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Signs you need bath repair in Queensville
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Fittings cause damage too: water sits around them, and any chip there soon rusts.
Look out for these signs:
- Rust spots around the plughole
- Scratches you can feel with a fingernail
- Hairline or through cracks in acrylic
- A chipped rim or side
Before booking anyone
- The length of the guarantee and what it covers
- Whether cleaning and preparation are in the price
- What aftercare is recommended
- When it can be used again
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Where we work around Queensville
Queensville is about 1 mile south-east of Stafford, in Staffordshire. Anywhere in ST17, we carry out the work at your property. We work in 512 places in Staffordshire. Our jobs stretch from Queensville to Birmingham (about 24 miles away).
Here we cover the ST17 and ST16 postcode area. We regularly work on streets such as York Road, Ascot Road and Meadow Road. We also cover the places around Queensville: Baswich (1 mile east), Berkswich (1 mile east), Walton-on-the-Hill (2 miles south-east), Acton Trussell (2 miles south) and Milford (2 miles east). We also work in nearby towns such as Cannock (8 miles south-east), Lichfield (14 miles south-east), Longton (13 miles north), Rugeley (7 miles east), Burntwood (11 miles south-east) and Stone (7 miles north).
Landmarks near Queensville
In Queensville, that means homes near William Salt Library, The Star and Garter pub and Chetwynd Centre. You will also find St Leonard's Primary School (under half a mile north-west), Stafford Manor High School (1.1 miles south-west) and Church of Holy Trinity (0.6 miles north-east). The closest station to Queensville is Stafford station, about 1.2 miles north-west. A little further out are The Staffordshire Police Museum (0.8 miles south-east) and Stafford Castle (2.1 miles west). For a walk, there’s Radford Meadows and Tixall Wide.
About our accreditations · Every repair comes with a one-year guarantee.
