Derby · England

Bath Repair for Allenton homes

Chip and crack repairs to enamel, acrylic and cast iron baths in Allenton, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • Impact holes in acrylic
  • A kit repair that didn’t last
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Allenton

Signs you need bath repair in Allenton

Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, often before anyone notices. We repair snagging damage like this regularly.

Send us a picture if you notice any of these:

  • Chips under the taps
  • Deep scratches in acrylic
  • Cracks in an acrylic bath
  • A kit repair that didn’t last

Before you book anyone

  • What happens if the damage is worse than the photos show
  • How the colour is matched
  • What prep work is covered
  • Aftercare advice

How to compare quotes

Bath repair in Allenton, done in place

Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. There is no plumbing to disconnect, the tiles aren’t touched, and the finish is matched to the rest of the bath. Our repair technicians work on cast iron enamel, pressed steel enamel and roll-top & freestanding, and common reasons people contact us are chips on the rim or sides and chips under the taps.

We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone.

Rusty chip next to a bath plughole, before and after repair
Area
Allenton (DE24, DE73)
Area hub
Derby
Warranty
A year, on every repair
Quote
From £95. Fixed and free, based on pictures
Telephone
0345 017 0787
Last updated
23 October 2026

How to look after the repair

Looking after the surface is easy, and it makes a real difference:

  • Have new chips seen to early
  • Stick to mild cleaners and a soft cloth
  • Put a towel in the bath if you are working above it
  • Rinse it down after each bath

Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.

Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.

Can I fix it myself?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

Repair or replace: which is better?

Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Repairs from £95, with every job priced individually. We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Why choose Surface Doctor in Allenton

  • Technicians who travel to you, UK-wide
  • One-year guarantee on every repair
  • Fixed prices from your pictures
  • CHAS, Constructionline and SafeContractor accredited

Take a look at our full price list or bath cost comparison.

How the visit works

On the day itself, there’s little for you to do. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to a few hours, depending on the damage, tidy-up included.

  1. Dust sheets and masking go down around the bath.
  2. The damaged area is cleaned, keyed and degreased.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We tidy up and tell you when the bath can be used, usually the following day.

Before we arrive

  • Avoid using the area for a few hours before we arrive
  • Tell us about any previous repairs or coatings
  • Keep children and pets away from the room on the day

Get a quote

For a price in Allenton, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Get a free quote

Related advice

Repairs by material

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.

What a repair cannot fix

Some problems need a builder, plumber or fitter rather than us:

  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • A steel bath rusted through
  • Wear across the whole surface, which needs re-enamelling

Send us photos and we’ll tell you honestly before booking.

Materials we repair

  • Whirlpool & spa baths
  • Pressed steel enamel
  • Roll-top & freestanding
  • Acrylic
  • Cast iron enamel

Prices and what affects them

Repairs from £95. We charge the same across the UK, including Allenton. The price reflects:

  • Doing more than one item at once
  • What kind of damage it is
  • Whether old repairs or coatings need taking off
  • How hard the colour is to match

Our prices are the same across the UK, with no extra for Allenton. What changes the price is the job itself: the material, the amount of damage and how many items.

Send photos for a quote

You can normally get a fixed price without us visiting. To make it quick:

  • A wider photo showing the entire bath
  • A clear, close picture of the problem area
  • Daylight if possible, and no flash reflection
  • A coin beside the damage so we can judge size

Most clients in Allenton get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

Allenton and the surrounding area

Allenton is about 2 miles south-east of Derby, in Derby. Whether you’re in the middle of Allenton or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Allenton is one of 31 places in Derby we cover. Our jobs stretch from Allenton to Birmingham (34 miles away).

Postcode districts we cover here: DE24 and DE73. Whether you live on Jubilee Road, South Avenue and Crawley Road or anywhere nearby, a technician can come to you. You will find Allenton on the A514, so it’s easy for us to reach. Close by, we cover Shelton Lock (1 mile south), Boulton (1 mile north-east), Chellaston (1 mile south), Alvaston (1 mile north-east) and Sinfin (2 miles west). Further out, we also cover Oakwood (4 miles north), Cathedral Quarter (3 miles north-west), Spondon (3 miles north-east), New Zealand (4 miles north-west), Littleover (3 miles north-west) and Allestree (5 miles north). Being one of Derby’s larger places, Allenton sees plenty of our work.

Landmarks near Allenton

Our customers here include homes close to Saint Edmund's Parish Church, Alvaston Park and The Golden Pheasant pub, among other places. You’ll also find Noel-Baker Community School (within half a mile east) and Shelton Infant School (under half a mile south-west). The nearest railway station is Peartree station, about 1.4 miles north-west. Well-known places in the area include Derbion (2.7 miles north-west) and Elvaston Castle (2.2 miles east).

Map of Allenton © OpenStreetMap contributors

Common questions in Allenton

What if the damage is worse than the photos show?

Your quote covers the damage in the pictures. Anything extra is discussed before we begin.

Are there extra charges for Allenton?

No. Our quotes include travel, with the same prices everywhere we work.

I rent my home. Can I book you?

Yes. Check with your landlord; we can send the quote to them too.

Can you repair a chip on a coloured bath?

Yes. We mix the colour on the day to match, including pastel and older colours.

Is it messy?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

How much does bath repair cost in Allenton?

Repairs from £95. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.

It’s been repaired before. Can you still fix it?

Most of the time. Tell us what was done before.

How do I book?

Use the quote form or ring 0345 017 0787.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.