Derbyshire · England
Bath Repair in Swarkestone
We travel to Swarkestone for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- A cracked acrylic bath
- Rust by the waste and overflow
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Bath repair at your home in Swarkestone
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, usually in a single visit. If you’re dealing with chips under the taps and deep scratches in acrylic, we can help, on whirlpool & spa baths, cast iron enamel and roll-top & freestanding alike.
We stand behind the work with a one-year guarantee, so you are not left on your own once we have gone.
- Location
- Swarkestone (DE73)
- Area hub
- Derbyshire
- Guarantee
- A year, on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Prices start from £95. Prices are worked out job by job. The main factors are:
- The material
- What kind of damage it is
- Whether we combine several jobs
- Where the damage is and how we get to it
Compared with replacing, repairing generally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
How to get a fixed price
Photographing the damage takes a minute. Try to send:
- Whether it’s been repaired or coated before
- What it’s made of, if you know
- The postcode, so we can plan the visit
- Something in shot to show the size
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Repair or replace in Swarkestone?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Our bath repair starts from £95. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why Swarkestone clients choose us
- Straight answers about what a repair can do
- A year’s guarantee on all work
- Repair technicians who travel to you, UK-wide
- Colours mixed by hand to suit your surface
Take a look at our pricing or resurfacing vs replacement cost guide.
What we’re called out for in Swarkestone
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
It’s worth getting a quote if you see:
- Damage done while the bathroom was being fitted
- Damage beneath the taps
- Holes from dropped items
- Scuffs and scratches in the surface
Questions to ask before you book
- How the room is protected while they work
- Who will actually do the work
- A fixed price, and whether VAT is included
- Aftercare advice
Nearby places to Swarkestone
Other services in Swarkestone
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- A dripping tap stains enamel, so fix it early
- Keep abrasive pads and gritty cleaners away from the bath
- Keep metal cans and razors off the surface
- Get any new chip repaired before it rusts
Care for the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and it can start to leak underneath.
Swarkestone and nearby
Swarkestone is about 4 miles south of Derby, in Derbyshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Swarkestone is one of 532 towns and villages in Derbyshire where we work. Our nearest city page is Birmingham, about 32 miles away.
We work across the DE73 postcode area. Local streets include Barrow Lane and Woodshop Lane, and we cover them all. Neighbouring places we cover include Barrow upon Trent (1 mile west), Stanton by Bridge (1 mile south-east), Chellaston (1 mile north-east), Shelton Lock (2 miles north) and Allenton (2 miles north). Larger places within reach include Swadlincote (7 miles south-west), Ilkeston (10 miles north-east), Long Eaton (8 miles east), Belper (12 miles north), Heanor (12 miles north) and Ripley (14 miles north).
Near you in Swarkestone
In Swarkestone, that means homes near Chellaston Academy, Crewe And Harpur Arms and Sale and Davys Church of England Primary School. For rail, the closest station is Peartree station, about 3.1 miles north. Well-known places in the area include Melbourne Castle (2.6 miles south-east) and National Sikh Heritage Centre & Holocaust Museum (3.4 miles north).
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Rust that has eaten right through a steel bath
- A bath worn all over, where resurfacing makes more sense
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Swarkestone
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Pressed steel enamel
What your bath is made of matters
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, in much the same way.
The process
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a morning or an afternoon. We tidy up before we leave and let you know when you can use it again.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, usually the next day.
Before we arrive
- Keep a parking space free if you can
- Move bottles, mats and clutter away from the area
- Mention if the room is upstairs or in a flat
Get a quote
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Advice
Swarkestone questions
Do you charge for travel?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
What information do you need?
Some photos, your postcode and how to reach you. On the day, access to the room.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
Can you repair a hole in a bath?
In most cases. Photos of the hole and the underside help us check.
What does bath repair cost?
Repairs from £95. We give a fixed quote from your pictures. Send a close-up of the damage and a wider photo with your DE73 postcode.
Is my repair covered?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Can landlords book you?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
How long does the repair take to cure?
Normally by the following day, depending on the repair.
About our accreditations · Every repair comes with a one-year guarantee.
