Walsall · England
Bath Repair in Alumwell
Problem with your bath in Alumwell? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Chips under the taps
- Chips along the edge of the bath
Should you replace it?
Replacing a bath rarely stops at the bath: tiles along the rim usually crack when it comes out, a new panel is frequently needed, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Prices start from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
What you get with us
- We leave the room as we found it
- Free fixed quotes from pictures
- Work done at your home or business
- One price list for the entire UK
Read our full price list and guide to resurfacing and replacement costs.
Bath repair at your home in Alumwell
Most of our bath repairs take a few hours, and the bath is back in use the next day. There is no need to book a plumber or tiler, because nothing is disconnected. If you’re dealing with impact holes in acrylic and chips under the taps, we can normally put it right.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will sort it.
- Area
- Alumwell (WS2, WS1)
- Region
- Walsall
- Warranty
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Also near Alumwell
Also in Alumwell
Prices and what affects them
Repairs from £95. A fixed quote means you know the cost before booking. We take into account:
- Previous DIY repairs that have to come out
- Access to the area
- How many areas need work
- The type of damage
A repair is priced on what needs doing, not your postcode. The full price is agreed before you book.
How to get a fixed price
A couple of clear pictures is all it takes. Try to include:
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
- Where you are, by postcode
- The material, if you know it
If you are in Alumwell and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Different materials, different repairs
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
For landlords and businesses
If you manage property in Alumwell, we’ll quote for several properties at once. Send photos for each one and we will come back with a combined price.
For developers and builders, we fix damage before handover. Several plots can be done in one visit.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
Our work in Alumwell
Alumwell is about 1 mile west of Walsall, in Walsall. We travel to homes and businesses in Alumwell and nearby villages, so there’s no workshop to go to. We work in all 39 towns and villages in Walsall. You can also see our page for Birmingham, about 9 miles away.
Here we cover the WS2 and WS1 postcode area. You will find streets such as Ely Road, Ida Road and Moat Road, all of which we cover. Main roads around Alumwell include the A454, which makes travel easy. Neighbouring places we cover include Pleck (1 mile south), Bentley (1 mile north-west), Darlaston Green (1 mile west), Darlaston (2 miles south-west) and Willenhall (2 miles west). Further out, we also cover Brownhills (5 miles north-east), Aldridge (4 miles north-east), Pelsall (3 miles north), Turnberry Estate (3 miles north), Shelfield (3 miles north-east) and Vigo (4 miles north-east).
Near you in Alumwell
Around Alumwell, we work in homes near Rose And Crown Public House, West Walsall E-ACT Academy and Alumwell Infant School and the streets around them. Other local landmarks include St John's Church (under half a mile south), West Walsall E-ACT Academy (under half a mile west) and Reedswood Park (0.7 miles north). The nearest railway station is Walsall station, roughly 0.7 miles east. A little further out are Birchills Canal Museum (0.7 miles north-east) and Dorothy Pattison Hospital (less than half a mile south-west). Green spaces nearby include Pouk Hill and Peascroft Wood.
FAQs for Alumwell
What areas do you cover?
We work UK-wide. Our prices are the same everywhere.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Is repairing better than replacing?
Generally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Is it OK to have pets in the house?
Just keep them out of the work area. We will let you know when it’s safe to use again.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Alumwell.
What happens once I’ve sent photos?
We review the photos and send a fixed quote with dates.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Aftercare tips
Aftercare is simple:
- If an acrylic bath flexes, have its feet adjusted
- Avoid scourers, wire wool and gritty cream cleaners
- Rinse it down after each bath
- Put a towel in the bath if you are working above it
There’s nothing special to do after a repair. Skip bleach and gritty creams.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
How the visit works
We begin by going over the job with you, so you know exactly what we are doing. Then the area is sheeted and masked and the work begins. Allow a morning or an afternoon, and we will tell you if anything changes.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, generally by the following day, the bath is ready to use.
Before we arrive
- Let us know which floor the room is on
- Let the surface dry out before the visit
- Let us know about parking or access
Ask for a price
The quickest way to a price is to send two or three photos through our quote form or ring us. We will say straight away if a repair is the right fix.
Related advice
What a repair cannot fix
Some problems need a builder, plumber or fitter rather than us:
- Leaking fittings, which need a plumber
- Wear across the whole surface, which needs re-enamelling
- Metal that has corroded all the way through
If in doubt, send photos and we’ll say what we think before booking.
Materials we repair
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
About our accreditations · Every repair comes with a one-year guarantee.
