Lincolnshire · England
Bath re-enamelling & resurfacing in Anderby, Lincolnshire
Local bath re-enamelling for Anderby: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- An outdated colour you’d like to change
What we can’t put right
We will not take on work that will not last, so here’s what a repair cannot put right:
- Anything hidden under an old coating, until we remove it
- Leaks from fittings rather than the bath
- An acrylic bath that flexes badly underfoot
If in doubt, send pictures and we will say what we think before you book.
Materials we work on in Anderby
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Bath re-enamelling in Anderby, done in place
Most baths are re-enamelled in a day. Nothing is disconnected or removed. Common call-outs are for an original cast iron bath that needs restoring and an outdated colour you’d like to change, in Victorian roll-tops, basins & shower trays and pressed steel baths.
We stand behind the work with a one-year guarantee.
- Area
- Anderby (PE24)
- Area hub
- Lincolnshire
- Warranty
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Anderby
Other services in Anderby
Our work in Anderby
Anderby is about 8 miles north of Skegness, in Lincolnshire. Whether you are in the middle of Anderby or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Anderby is one of 732 places in Lincolnshire where we work.
Our technicians cover all of PE24 and the streets around it. We regularly work on streets such as Pinfold Lane, Sea Road and Roman Bank and the roads around them. We also cover the places around Anderby: Anderby Creek (1 mile east), Huttoft (2 miles west), Authorpe Row (2 miles south), Mumby (2 miles south-west) and Helsey (2 miles south-west). Larger places within reach include Louth (15 miles north-west), Skegness (8 miles south), Mablethorpe (6 miles north), Sutton on Sea (4 miles north), Spilsby (10 miles south-west) and Alford (5 miles west).
What’s near Anderby
We visit homes around Church of St Andrew, among other places. Other landmarks nearby include Alford and District War Memorial Cottage Hospital (5.6 miles west).
Repairs by material
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Common questions in Anderby
Is my repair covered?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
When can you do it?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
Do the materials smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first, so mention it when you send photos.
How long is the bath unusable?
One day for most baths and can be used the day after. We will confirm timings when we quote.
Landlord and trade work in Anderby
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
For anyone letting property in or around Anderby, we will quote for several properties at once. Send photos for each one and we’ll price them together.
Repairing versus replacing in Anderby
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why us?
- No need to remove anything
- Most jobs done in one visit
- CHAS, Constructionline and SafeContractor accredited
- One-year guarantee on every repair
Take a look at our full price list or guide to resurfacing and replacement costs.
Keeping it looking good
Once the work has cured, treat it gently:
- Leave the bath for the full curing time before using it
- Clean with a soft cloth and mild detergent
- Don’t let dyes or oils sit on the finish
- Keep toiletries on a shelf rather than in the bath
Use mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
What bath re-enamelling costs
Prices start from £350. Every quote is fixed and free. What we take into account:
- How hard the colour is to match
- How much damage there is
- How many items we do on one visit
- Previous DIY repairs that have to come out
Our prices are the same across the UK, with no extra for Anderby. The job itself decides the price: the material, the amount of damage and how many items.
How to get a fixed quote
When you take your photos, these tips help us give you a firm price:
- Something in shot to show the size
- What it’s made of, if you know
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Do you need bath re-enamelling in Anderby?
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
People normally call us after spotting something like this:
- Stains that will not shift
- Several chips and rust patches
- An old resurfacing that’s failing
- Worn patches where water runs and sits
What your quote should include
- How soon you can use it again
- Aftercare advice
- What happens if the damage is worse than the photos show
- Whether the price is fixed and includes VAT
The process
Visits start with a quick look at the job together. After that, protection goes down around the work area and we start. You can expect it to take most of the day.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Move bottles, mats and clutter away from the area
- Mention any parking restrictions or tricky access
- Avoid using the area for a few hours before we arrive
Get a quote
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
