Lancashire · England
Bath chip & crack repair in Andertons Mill, Lancashire
Local bath repair for Andertons Mill: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Deep scratches in acrylic
Covering Andertons Mill
Andertons Mill is about 4 miles north-west of Standish, in Lancashire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our technicians cover all 482 towns and villages in Lancashire, from the larger towns to small villages. Our nearest city page is Liverpool, about 17 miles away.
Jobs in L40 and PR7 are booked in the same way as anywhere else. You’ll find streets such as Bentley Lane and Sanderson Lane. Neighbouring places we cover include Towngate (1 mile north-west), Heskin (1 mile north), Heskin Green (1 mile north-east), Wrightington Bar (1 mile east) and Mawdesley (1 mile west). We also work in nearby towns such as Preston (10 miles north), Chorley (5 miles north-east), Lytham St Anne's (14 miles north-west), Bamber Bridge (8 miles north), Leyland (5 miles north) and Fulwood (11 miles north).
Landmarks near Andertons Mill
We visit homes around St Peter and Paul Catholic Primary School and St James' Church, among other places. The closest station to Andertons Mill is Parbold station, roughly 2.6 miles south-west of the centre. Nearby you will also find Wrightington Hospital (2.4 miles south-east). The countryside around Andertons Mill includes Mere Sands Wood.
About our bath repair in Andertons Mill
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. If you’re dealing with impact holes in acrylic and chips along the edge of the bath, we can help, on acrylic, roll-top & freestanding and pressed steel enamel alike.
Every repair comes with a one-year guarantee.
- Area
- Andertons Mill (L40, PR7)
- Area hub
- Lancashire
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What a repair can’t fix
In fairness, there are a few things a repair won’t fix:
- Rust that has eaten right through a steel bath
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Leaking fittings, which need a plumber
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Can I fix it myself?
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Your questions about bath repair in Andertons Mill
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including older coloured suites.
Will I be able to see the repair?
On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.
Can you repair something that’s been repaired before?
Yes, we often do. Removing the old work can add time, and that is in the quote.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Andertons Mill.
Can you repair a crack in an acrylic bath?
Often, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a picture.
How do I get a price for bath repair in Andertons Mill?
Prices start from £95. We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo with your L40 postcode.
Do you cover Andertons Mill?
Yes. We cover the whole UK and come to Andertons Mill and the rest of Lancashire. Send us pictures for a fixed quote, or call 0345 017 0787.
What we are called out for in Andertons Mill
Baths take more knocks than people expect: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
Typical reasons for a call-out include:
- Holes from dropped items
- A kit repair that didn’t last
- Chips caused by builders
- A chip where the taps sit
Before booking anyone
- What happens if the damage is worse than the pictures show
- What aftercare is recommended
- Whether there are any call-out or travel charges
- How your room will be protected
For landlords and businesses
We regularly work with letting and managing agents. Send the address, pictures and access details and we will handle the rest.
Landlords, letting agents and housing providers in Andertons Mill use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Towns and villages near Andertons Mill
What else we do in Andertons Mill
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Rinse it down after each bath
- Cover the bath during DIY or decorating
- Store metal items away from the bath
- Have new chips seen to early
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine, avoiding abrasives.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Take it off before we arrive.
How it works
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the work takes two to three hours for most chips. Before we leave, we explain the curing time and the aftercare.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, normally by the following day, the bath is ready to use.
Preparing for the visit
- Let the surface dry out before the visit
- Move bottles, mats and clutter away from the area
- Tell us about any previous repairs or coatings
Getting a price
Most customers in Andertons Mill get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Advice
Repair or replace: which is better?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it’s done in one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.
Why Andertons Mill clients choose us
- Same prices wherever you are
- Straight answers about what a repair can do
- CHAS, Constructionline and SafeContractor accredited
- One visit for most repairs
Take a look at our pricing or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
