Hampshire · England
Bath chip & crack repair in Anmore, Hampshire
Bath repair in and around Anmore: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- A chip where the taps sit
- Chips caused by builders
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Rinse it down after each bath
- A dripping tap stains enamel, so fix it early
- Have new chips seen to early
- Clean with warm water and a mild detergent
Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Bath repair in Anmore, done in place
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. If you are dealing with rusty patches near the plughole and a kit repair that didn’t last, we can help.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Anmore (PO7)
- Area hub
- Hampshire
- Guarantee
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
About Anmore
Anmore is about 1 mile north-west of Waterlooville, in Hampshire. Customers in Anmore get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. We cover all 683 towns and villages across Hampshire. You can also see our page for London, about 58 miles away.
Jobs in PO7 are booked in the same way as anywhere else. Jobs here include addresses on Anmore Road and Soake Road. We also travel to Wecock Farm (1 mile east), Denmead (1 mile west), Lovedean (1 mile north-east), Horndean (2 miles east) and Anthill Common (2 miles west). Larger places within reach include Gosport (8 miles south-west), Havant (4 miles south-east), Eastleigh (14 miles west), Fareham (7 miles south-west), Hedge End (11 miles west) and Petersfield (9 miles north-east).
Near you in Anmore
We visit homes around The Mead End, Denmead Infant School and The Cowplain School and the streets around them. The nearest railway station is Bedhampton station, roughly 4 miles south-east. Further afield, we also cover the area around Queen Alexandra Hospital (3.6 miles south) and Clanfield Earthwork (4.3 miles north-east). Open spaces near Anmore include St Clair's Meadow and Windmill Hill.
Places near Anmore
What else we do in Anmore
When to call us in Anmore
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: the bath is not properly supported, so it flexes under weight.
Keep an eye out for these signs:
- Chips along the edge of the bath
- A kit repair that didn’t last
- A cracked acrylic bath
- A chip where the taps sit
Before you book anyone
- When it can be used again
- The length of the guarantee and what it covers
- Whether a trained technician does the job
- Whether they match the colour on site
Your questions about bath repair in Anmore
Do you come to Anmore?
Yes. We cover the entire UK and travel to Anmore and the rest of Hampshire. Send us pictures for a fixed quote, or call 0345 017 0787.
Is there any odour?
There may be a mild smell during the work that clears as it cures.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What happens next?
You will get a fixed quote back, plus dates. You are under no obligation.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Hampshire.
Can you repair a failed DIY repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send pictures.
Repair or replace in Anmore?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like isn’t cheap. A repair keeps it in place. Repairs from £95, with every job priced individually. We charge the same wherever you are, with no extra for Anmore. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why Anmore clients choose us
- We come to you, anywhere in the UK
- Everything repaired in place
- One price list for the whole UK
- Free fixed quotes from pictures
Take a look at our prices page or resurfacing vs replacement cost guide.
When a repair isn’t the answer
We would rather lose a job than do one that will not last, so these are the limits:
- Cracks in parts of an acrylic bath we cannot get to from below
- Leaking fittings, which need a plumber
- A bath worn all over, where resurfacing makes more sense
If in doubt, send photos and we will say what we think before booking.
Materials we work on in Anmore
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
The process
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the work takes a morning or an afternoon. At the end we talk you through the curing time and the aftercare.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Tell us about parking, stairs or access
- Tell us about any previous repairs or coatings
Get a quote
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We will say right away if a repair is the right fix.
Related advice
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
What bath repair costs
Prices start from £95. Every quote is fixed and free. What we take into account:
- How hard the colour is to match
- Whether we combine several jobs
- How many areas need work
- The material and finish
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
How to get a fixed price
A couple of clear pictures is all it takes. Try to include:
- The material, if you know it
- A clear, close picture of the problem area
- Whether it’s been repaired or coated before
- A coin beside the damage so we can judge size
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price without visiting.
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
About our accreditations · Every repair comes with a one-year guarantee.
