Hampshire · England
Bath Repair in Denmead
Bath repair in Denmead without the cost of replacing. Get a fixed price from your photos, then book a visit.
- Repairs from £95
- A chipped rim or side
- Deep scratches in acrylic
Questions from Denmead
Can a cracked acrylic bath be fixed?
Frequently, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
Can rust on a bath be repaired?
Yes, very often. The rust is cut back to clean metal and sealed before we fill and finish it.
Will I be able to see the repair?
On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.
Which areas do you work in?
All of Hampshire, and the rest of the UK. Travel is included in the price.
What happens once I’ve sent photos?
You’ll get a fixed quote back, generally with dates to choose from. You’re under no obligation.
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
How we handle bath repair in Denmead
You do not need a new bath because of a chip. Our technicians fill, shape and refinish the damage, mixing the colour on the day so the repair is hard to spot. We regularly repair acrylic, roll-top & freestanding and pressed steel enamel, and common reasons people contact us are hairline or through cracks in acrylic and a failed DIY repair that’s discoloured or lifting.
The work is covered for a year after we finish. Just call us if there is a problem and we will come back.
- Location
- Denmead (PO7)
- Region
- Hampshire
- Guarantee
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Our work in Denmead
Denmead is about 2 miles north-west of Waterlooville, in Hampshire. We visit customers in Denmead and nearby villages, so nothing has to leave your home. We work in 683 places in Hampshire, from the larger towns to small villages. Our nearest city page is London, about 59 miles away.
Postcode districts we cover here: PO7. Local streets include Ashling Park Road, Chestnut Close and The Orchard, all of which we cover. Denmead is on the B2150, which makes it straightforward to reach. We also cover the places around Denmead: Anmore (1 mile east), Anthill Common (1 mile north-west), Wecock Farm (2 miles east), Lovedean (2 miles east) and Hambledon (2 miles north-west). We also work in nearby towns such as Winchester (15 miles north-west), Gosport (8 miles south-west), Havant (4 miles south-east), Eastleigh (13 miles west), Fareham (7 miles south-west) and Chandler's Ford (15 miles north-west).
Local landmarks in Denmead
Our customers here include homes close to Church of All Saints, Denmead Junior School and The Cowplain School, among other places. The closest station to Denmead is Cosham station, roughly 4.1 miles south of the centre. Further afield, we also cover the area around Queen Alexandra Hospital (3.5 miles south) and Portchester Castle (4.9 miles south-west). For a walk, there’s Portsdown Hill and St Clair's Meadow.
For landlords and businesses
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Housing associations and facilities teams use us for planned and reactive repairs in Hampshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
What happens on the day
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Plan for a few hours. Before we go, we’ll explain when it can be used and how to care for it.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can normally use the bath the following day.
How to prepare
- Tell us about any previous repairs or coatings
- Tell us about parking, stairs or access
- Keep a parking space free if you can
How to get a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price.
Advice
Looking after it afterwards
It’s all simple stuff:
- Get any new chip repaired before it rusts
- Check that an acrylic bath doesn’t move when you stand in it
- Keep metal cans and razors off the surface
- Stick to mild cleaners and a soft cloth
Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.
Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
Nearby places to Denmead
Other services in Denmead
Repairs by material
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Prices and what affects them
Repairs from £95. Every quote is fixed and free. What we look at:
- Any earlier repairs that need removing first
- The colour and finish to match
- How easy the damage is to reach
- What the surface is made of
A repair is priced on what needs doing, not where you live. You will see the full price before booking.
Getting a price from pictures
When you take your pictures, these tips help us give you a firm price:
- One sharp close-up of the damage
- Something in shot to show the size
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
To get a price, send a couple of pictures through our quote form or ring us. We’ll say right away if a repair is the right fix.
Repairing versus replacing in Denmead
Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Repairs from £95, with every job priced individually. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why book with us
- No need to remove anything
- We’ll tell you if it’s not worth repairing
- CHAS, Constructionline and SafeContractor accredited
- A fixed quote before booking
Take a look at our full price list and guide to resurfacing and replacement costs.
Signs you need bath repair in Denmead
Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, any chip down to the metal will start to rust.
The most common problems we are called about are:
- A chip where the taps sit
- Chips caused by builders
- Rust by the waste and overflow
- Hairline or through cracks in acrylic
Before you book anyone
- Aftercare advice
- How changes to the job are handled
- How long it needs to cure
- How your room will be protected
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
About our accreditations · Every repair comes with a one-year guarantee.
