Warwickshire · England
Bath Repair in Ascott
Chip and crack repairs to enamel, acrylic and cast iron baths in Ascott, carried out at your home and guaranteed for a year.
- Repairs from £95
- Rust by the waste and overflow
- A failed DIY repair that’s discoloured or lifting
Signs you need bath repair in Ascott
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: the bath isn’t properly supported, so it flexes under weight.
You may need us if you’ve spotted:
- A chip where the taps sit
- Rust spots around the plughole
- Deep scratches in acrylic
- Chips caused by builders
Questions to ask before you book
- Who turns up on the day
- A fixed price, and whether VAT is included
- What happens if the damage is worse than the photos show
- What prep work is covered
Bath repair at your home in Ascott
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, generally in a single visit. Typical jobs include scratches you can feel with a fingernail and rusty patches near the plughole, on acrylic, pressed steel enamel and cast iron enamel.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Ascott (CV36)
- Region
- Warwickshire
- Cover
- 12 months on all our work
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath repair
Repairs from £95. You will not pay by the hour. The price is based on:
- How many items we do on one visit
- Any earlier repairs that need removing first
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
Our prices are the same across the UK, with no extra for Ascott. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Send photos for a quote
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Any details about the material
- Any earlier repairs or coatings
- Your postcode, so we can check dates
- One sharp close-up of the damage
The quickest way to a price is to send a couple of photos through our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Can I fix it myself?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
What we can’t put right
To be straight with you, some problems need a different fix:
- Metal that has corroded all the way through
- Cracks in parts of an acrylic bath we can’t get to from below
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send photos and we’ll say what we think before booking.
Surfaces we repair
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
How the visit works
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. Most jobs take a few hours, and you’re welcome to carry on with your day while we work.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, usually the following day.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Have a window or extractor fan available
- Move bottles, mats and clutter away from the area
Get a quote
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and no obligation.
Read more
Work for landlords and builders
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
FAQs for Ascott
Do you repair coloured baths?
Yes. We mix the colour on the day to match, including pastel and older colours.
Will the repair last?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
What happens once I’ve sent photos?
We review the pictures and send a fixed quote with dates.
What information do you need?
Use the quote form or ring 0345 017 0787, and we will do the rest.
Do you work in Ascott?
Yes. We cover the entire UK and come to Ascott and the rest of Warwickshire. Send photos and we will quote, or call 0345 017 0787.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before.
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
Will there be a smell?
There may be a mild smell during the work that clears as it cures.
What else we do in Ascott
Looking after it afterwards
Once the work has cured, treat it gently:
- Clean with warm water and a mild detergent
- Do not leave razors or cans standing in the bath
- Protect the bath with a towel when doing jobs nearby
- Have new chips seen to early
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine, avoiding abrasives.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
Our work in Ascott
Ascott is about 9 miles south-west of Banbury, in Warwickshire. Whether you are in the middle of Ascott or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Ascott is one of 324 places in Warwickshire where we work. We work right across the region, from Ascott to Birmingham (about 35 miles away).
We cover every part of the CV36 postcode area and the streets around it. We also travel to Whichford (1 mile west), Sutton-under-Brailes (2 miles north-west), Cherington (2 miles north-west), Stourton (2 miles north-west) and Lower Brailes (3 miles north). Larger places within reach include Stratford-upon-Avon (15 miles north-west), Shipston-on-Stour (5 miles north-west), Wellesbourne (13 miles north), Middle Quinton (12 miles north-west), Meon Vale (12 miles north-west) and Lighthorne Heath (13 miles north).
What’s near Ascott
Around Ascott, we work in homes near Church of St Michael. Nearby you’ll also find Ellen Badger Hospital (5.5 miles north-west) and Wheelbarrow Castle (4.1 miles south-west). Green spaces nearby include Castle Hill and Woodford Bottom and Lamb's Pool.
Repair or replace: which is better?
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it’s done in one visit, and nothing else in the room changes. Our bath repair starts from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Why us?
- No extra charge for your area
- We come to you, anywhere in the UK
- A fixed quote before you book
- Dust sheets down, tidy finish
Read our pricing or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
