Derbyshire · England
Bath chip & crack repair in Ashover, Derbyshire
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Ashover and across Derbyshire. Send photos for a free, fixed quote.
- Repairs from £95
- A cracked acrylic bath
- Damage done while the bathroom was being fitted
Repairs by material
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, just like other baths.
Bath repair in Ashover without replacing anything
You do not need a new bath because of a chip. Our repair technicians fill, shape and refinish the damage, with the colour mixed on site so the repair is hard to spot. If you are dealing with deep scratches in acrylic and chips on the rim or sides, we can typically put it right.
Big or small, you get the same one-year guarantee.
- Where
- Ashover (S45)
- County
- Derbyshire
- Warranty
- A year, on every repair
- Price
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
About Ashover
Ashover is about 5 miles south of Chesterfield, in Derbyshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We cover 532 places in Derbyshire, from the larger towns to small villages. We work right across the region, from Ashover to Manchester (about 37 miles away).
All of S45 is covered, from the main roads to the quietest streets. That includes homes on Pudding Bag Lane, Moor Road and Malthouse Lane. Neighbouring places we cover include Farhill (1 mile east), Kelstedge (1 mile west), Alton (1 mile north-east), Littlemoor (1 mile south-east) and Fallgate (1 mile south-east). Larger places within reach include Chesterfield (5 miles north), Ilkeston (15 miles south-east), Belper (10 miles south), Heanor (12 miles south-east), Dronfield (9 miles north) and Ripley (9 miles south).
What’s near Ashover
We visit homes around Ashover Primary School, Church of All Saints and Black Swan pub and the streets around them. For rail, the closest station is Matlock station, roughly 3.9 miles south-west. Further afield, we also cover the area around Clay Cross Hospital (3 miles east) and Clay Cross Urban District (2.8 miles east). The countryside around Ashover includes Beeley Moor.
For landlords and businesses
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Landlords, letting agents and housing providers in Ashover use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
How we price bath repair
Prices start from £95. We charge the same across the UK, including Ashover. What changes the price is:
- What the surface is made of
- Whether old repairs or coatings need taking off
- The type of damage
- Doing more than one item at once
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
How to get a fixed price
You can usually get a fixed price without us visiting. To help us price it:
- A wider photo showing the whole bath
- Details of any past repairs
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We will say immediately whether it can be repaired.
Repair or replace: which is better?
A new bath brings a chain of other jobs: tiles along the rim generally crack when it comes out, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Prices start from £95. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in Ashover
- We leave the room as we found it
- Nothing taken out or refitted
- Colour mixed on the day to match
- One-year guarantee on every repair
See our pricing and bath cost comparison.
Nearby places to Ashover
More services for Ashover
How it works
Visits start with a quick look at the job together. After that, protection goes down around the work area and we start. You can expect it to take a few hours, and we will keep you posted as we go.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the following day.
Before we arrive
- Point us to the nearest place to park
- Move bottles, mats and clutter away from the area
- Plan for the room to be out of bounds to pets and children
Ask for a price
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and you’ll get a fixed price back. There is no charge for the quote and no obligation.
Related advice
Ashover questions
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.
What happens after I send pictures?
We review the pictures and send a fixed quote with dates.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Will the repair show?
On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Can you repair several things at once?
Of course, and it usually saves money. Just add the extra items to your pictures and you’ll get one combined price.
Can you redo an old repair?
Yes, we do this frequently. We strip it out, deal with any rust and repair it again.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Common problems we fix in Ashover
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the base flex until it cracks.
Look out for these signs:
- Cracks in an acrylic bath
- Deep scratches in acrylic
- Damage beneath the taps
- Holes from dropped items
What your quote should include
- How long the guarantee is and what it covers
- How long it needs to cure
- How changes to the job are handled
- Whether a trained technician does the job
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Don’t leave a fresh chip for long
- Rinse it down after each bath
- Get a dripping tap fixed promptly
- Store metal items away from the bath
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath, avoiding abrasives.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
About our accreditations · Every repair comes with a one-year guarantee.
