Derbyshire · England
Bath chip & crack repair in Alton, Derbyshire
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Alton. Free, fixed quotes from your photos.
- Repairs from £95
- A cracked acrylic bath
- A kit repair that didn’t last
DIY kit or professional repair?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Bath repair in Alton, done in place
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. Typical jobs include rust spots around the plughole and a kit repair that didn’t last, in whirlpool & spa baths, roll-top & freestanding and cast iron enamel.
All our work is covered by a one-year guarantee, wherever you are in Derbyshire.
- Area
- Alton (S42)
- Area hub
- Derbyshire
- Cover
- One year on every repair
- Quote
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Alton
For anyone letting property in or around Alton, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
What bath repair costs
Prices start from £95. There’s no charge for travel to Alton. The price comes down to:
- What the surface is made of
- How hard the colour is to match
- How easy the damage is to reach
- The type of damage
A repair typically costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Getting a price from pictures
The better the pictures, the more accurate the price. Here’s what we find most useful:
- Any earlier repairs or coatings
- One picture of the entire bath
- Good light, ideally daylight, without flash glare
- The material, if you know it
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
How the visit works
On the day itself, there’s little for you to do. Let us in and show us the room, and we will take it from there. The job generally runs to a few hours, tidy-up included.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the next day.
How to prepare
- Ensure the area is dry
- Open a window if you can
- Keep pets and children out of the room while we work
Getting a price
If you’re in Alton and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Read more
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Common problems we fix in Alton
Heavy toiletries are the biggest single cause of chips, with dropped shower heads close behind. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.
Keep an eye out for any of the following:
- A hole punched through by something heavy
- Hairline or through cracks in acrylic
- A failed DIY repair that is discoloured or lifting
- Rusty patches near the plughole
Questions to ask before you book
- How the room is protected while they work
- Whether cleaning and preparation are in the price
- What happens if they find more damage
- Whether they match the colour on site
FAQs for Alton
What about rust by the waste?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
How do I book?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before and we will plan for it.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
When can you do it?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Towns and villages near Alton
What else we do in Alton
Repair or replace: which is better?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it’s done in one visit, and nothing else in the room changes. Our bath repair starts from £95. Our prices are the same across the UK, so there’s no premium for Alton. The job itself decides the price: the material, the amount of damage and how many items.
What you get with us
- No extra charge for your area
- One-year guarantee on every repair
- We come to you, anywhere in the UK
- Colours mixed by hand to suit your surface
Read our pricing or resurfacing vs replacement cost guide.
Alton and the surrounding area
Alton is about 5 miles south of Chesterfield, in Derbyshire. Wherever you are in the S42 postcode area, we carry out the work at your property. We cover 532 places in Derbyshire. Our nearest city page is Manchester, about 38 miles away.
Postcode districts we cover here: S42. We regularly work on streets such as Alton Hill and Brownhills Lane and the roads around them. Nearby, we also work in Northedge (1 mile north), Farhill (1 mile south-west), Press (1 mile north-east), Bole Hill (1 mile north) and Hollins Green (1 mile south-east). Further out, we also cover Chesterfield (5 miles north), Ilkeston (15 miles south-east), Belper (10 miles south), Heanor (12 miles south-east), Dronfield (9 miles north) and Ripley (9 miles south).
Near you in Alton
In Alton, that means homes near Tupton Hall School, Church of All Saints and Ashover Primary School, among other places. Alton’s nearest station is Chesterfield station, about 4.7 miles north. A little further out are Clay Cross Urban District (2.1 miles east) and Clay Cross Hospital (2.2 miles east).
When a repair is not the answer
We will not take on work that won’t last, so here’s what a repair cannot put right:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Water coming from the waste or taps rather than the bath
- Cracks in parts of an acrylic bath we cannot get to from below
Send us photos and we’ll tell you honestly.
Materials we repair
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
About our accreditations · Every repair comes with a one-year guarantee.
