Derbyshire · England
Bath Repair in Kelstedge
Bath repair in and around Kelstedge: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- Rust by the waste and overflow
- Chips on the rim or sides
When a repair isn’t the answer
To be straight with you, some problems need a different fix:
- Cracks in parts of an acrylic bath we can’t get to from below
- A steel bath rusted through
- Wear across the whole surface, which needs re-enamelling
Send us pictures and we will tell you honestly.
What we work on
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
Bath repair in Kelstedge, done in place
A typical bath repair is a few hours’ work, and you can normally bathe again the next day. You won’t need a plumber or tiler, because nothing is disconnected. We regularly repair roll-top & freestanding, whirlpool & spa baths and acrylic, and people most frequently call us about rust by the waste and overflow and snagging damage from a refit.
All our work comes with our one-year guarantee, wherever you are in Derbyshire.
- Area
- Kelstedge (S45)
- Area hub
- Derbyshire
- Warranty
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What we do, step by step
Nothing needs to be moved out of the room. We bring everything we need with us, put protection down and get going once we have agreed what we’re doing. Most jobs take a morning or an afternoon, and you are welcome to carry on with your day while we work.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Let us know which floor the room is on
- Mention any parking restrictions or tricky access
- Plan for the room to be out of bounds to pets and children
Getting a price
If you’re in Kelstedge and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
Kelstedge questions
Is a bath repair permanent?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps it last.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Can you repair a failed DIY repair?
Yes. We remove the old filler and start again. Mention it when you send photos.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
What about rust by the waste?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
Is it OK to have pets in the house?
Just keep them out of the work area. We will let you know when it’s safe to use again.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, access to the room.
Aftercare tips
A little care keeps the finish looking good. Our advice:
- Put a towel in the bath if you are working above it
- Get any new chip repaired before it rusts
- Give the bath a quick rinse after use
- Check that an acrylic bath doesn’t move when you stand in it
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
What bath repair costs
Prices start from £95. We give every job a fixed quote from photos. These are the things that affect it:
- Whether we combine several jobs
- The colour and finish to match
- The material and finish
- Where the damage is and how we get to it
Set against the cost of replacement, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what we need:
- One picture of the entire bath
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Kelstedge and nearby
Kelstedge is about 5 miles south-west of Chesterfield, in Derbyshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Kelstedge is one of 532 places in Derbyshire where we work. Our nearest city page is Manchester, about 37 miles away.
Jobs in S45 are booked in the same way as anywhere else. Whether you live on Ashover Road, Reresby Dene and West Edge Close or a nearby road, a technician can come to you. Nearby, we also work in Ashover (1 mile east), Farhill (1 mile east), Fallgate (1 mile south-east), Alton (1 mile east) and Littlemoor (2 miles south-east). Further out, we also cover Chesterfield (5 miles north-east), Belper (10 miles south), Heanor (12 miles south-east), Dronfield (9 miles north), Ripley (9 miles south-east) and Bolsover (10 miles north-east).
Near you in Kelstedge
Our customers here include homes close to The Crispin Inn, Church of All Saints and Highfields School, among other places. The nearest railway station is Matlock station, roughly 3.5 miles south-west of the centre. Well-known places in the area include Clay Cross Hospital (3.6 miles east) and Willersley Castle (4.9 miles south-west). The countryside around Kelstedge includes Beeley Moor.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
Places near Kelstedge
Other services in Kelstedge
Should you replace it?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. A repair keeps it in place. Prices start from £95. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your pictures, so you know the cost before you book.
What you get with us
- A fixed quote before you book
- One visit for most repairs
- One-year guarantee on every repair
- CHAS and Constructionline accredited
Read our prices page and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
