Nottinghamshire · England
Bath Repair in Aslockton
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Aslockton and across Nottinghamshire. Send photos for a free, fixed quote.
- Repairs from £95
- Deep scratches in acrylic
- Chips on the rim or sides
Bath repair in Aslockton without replacing anything
A typical bath repair is a few hours’ work, and you can normally bathe again the following day. There is no need to book a plumber or tiler, because nothing is disconnected. Whether it’s damage done while the bathroom was being fitted and impact holes in acrylic, we can typically put it right, on roll-top & freestanding, pressed steel enamel and cast iron enamel alike.
You’re covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Area
- Aslockton (NG13)
- Area hub
- Nottinghamshire
- Guarantee
- A year, on every repair
- Price
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Aslockton: your questions answered
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Do you charge for travel?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
Is a bath repair durable?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps.
Can tenants book a repair?
Of course. Check with your landlord; we can send the quote to them too.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including older coloured suites.
When can you do it?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Is there any odour?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
Why repair rather than replace?
Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Repairs from £95, with every job priced individually. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before you book.
Why Aslockton clients choose us
- Colour mixed on the day to match
- One-year guarantee on every repair
- Fixed prices from your pictures
- We leave the room as we found it
Read our prices page or resurfacing vs replacement cost guide.
Do you need bath repair in Aslockton?
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
Keep an eye out for any of the following:
- Damage beneath the taps
- Deep scratches in acrylic
- Chips caused by builders
- An old repair that has yellowed or come loose
What to look for in a quote
- Whether there are any call-out or travel charges
- Is the price fixed, and does it include VAT?
- What preparation is included
- What aftercare is recommended
Landlord and trade work in Aslockton
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
How the visit works
Visits start with a quick look at the job together, so you know exactly what we are doing. After that, protection goes down around the work area and the work begins. It normally takes a few hours, and we’ll keep you posted as we go.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Tell us if there are stairs or a lift
- Tell us about any previous repairs or coatings
- Ensure the room can be ventilated
Get a quote
Most clients in Aslockton get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Related advice
Looking after it afterwards
Nothing complicated is needed:
- Stick to mild cleaners and a soft cloth
- Get a dripping tap fixed promptly
- Store metal items away from the bath
- Rinse the bath after use, especially in hard water areas
Do not leave razors, cans or hair grips in the bath, as they can leave rust marks. And fix dripping taps promptly.
Don’t leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
Repairs by material
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Honest limits
A few problems are outside what a surface repair can do:
- Flexing caused by a failed cradle or loose feet
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Rust that has eaten right through a steel bath
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Towns and villages near Aslockton
Also in Aslockton
Our work in Aslockton
Aslockton is about 8 miles east of Carlton, in Nottinghamshire. Jobs in Aslockton are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Aslockton is one of 329 towns and villages in Nottinghamshire where we work. Our jobs stretch from Aslockton to Birmingham (53 miles away).
We cover every part of the NG13 postcode area and the streets around it. Jobs here include addresses on Main Street, Noble Lane and Dawn's Lane and the roads around them. We also travel to Whatton-in-the-Vale (1 mile south-east), Orston (2 miles east), Hawksworth (2 miles north), Granby (2 miles south) and Flawborough (3 miles north-east). Within a short drive, we also cover Beeston (14 miles west), Carlton (8 miles west), Hucknall (14 miles north-west), Newark-on-Trent (9 miles north-east), West Bridgford (10 miles west) and Netherfield (7 miles west).
Landmarks near Aslockton
Locally, our jobs take us to homes close to The Suthers School, Archbishop Cranmer Church of England Academy and St. Thomas' Church, among other places. There is a railway station in Aslockton itself: Aslockton station. Other landmarks nearby include Flintham Museum (3.8 miles north) and East Bridgford Pancake Hill (3.9 miles north-west).
About our accreditations · Every repair comes with a one-year guarantee.
