Nottinghamshire · England
Bath chip & crack repair in Hawksworth, Nottinghamshire
Bath repair in Hawksworth without the cost of replacing. Send us photos for a fixed price, then we come to you.
- Repairs from £95
- Chips caused by builders
- A kit repair that didn’t last
Repairs by material
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so repair chips early.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.
Bath repair in Hawksworth, done in place
Most of our bath repairs take a few hours, and you can typically bathe again the next day. There’s no need to book a plumber or tiler, because the bath does not move. We’re often asked to fix a cracked acrylic bath and a failed DIY repair that’s discoloured or lifting, in acrylic, roll-top & freestanding and cast iron enamel.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Where
- Hawksworth (NG13)
- County
- Nottinghamshire
- Cover
- One year on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Where we work around Hawksworth
Hawksworth is about 7 miles south-west of Newark-on-Trent, in Nottinghamshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. Our repair technicians cover 329 places in Nottinghamshire, from the larger towns to small villages. We work right across the region, from Hawksworth to Birmingham (55 miles away).
Jobs in NG13 work the same way as everywhere else we cover. Nearby, we also work in Flawborough (2 miles east), Orston (2 miles south-east), Aslockton (2 miles south), Whatton-in-the-Vale (2 miles south) and Kilvington (3 miles east). We also work in nearby towns such as Beeston (15 miles west), Carlton (9 miles west), Hucknall (14 miles west), Newark-on-Trent (7 miles north-east), West Bridgford (11 miles west) and Netherfield (8 miles west).
Landmarks near Hawksworth
Around Hawksworth, we work in homes near Church of St. Mary and All Saints. The nearest railway station is Aslockton station, roughly 2.3 miles south. Other landmarks nearby include Flintham Museum (1.9 miles north-west) and Radcliffe Asylum (5.7 miles south-west).
What bath repair costs
Repairs from £95. We price every job individually. What matters most is:
- Whether we combine several jobs
- The size and number of damaged areas
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Send photos for a quote
Almost every job we do is priced from pictures. This is what to send:
- Daylight if possible, and no flash reflection
- A clear, close picture of the problem area
- Something in shot to show the size
- What it’s made of, if you know
Email us pictures of the damage and a wider shot of the whole item, and tell us you are in Hawksworth, and we’ll come back with a fixed quote.
Nearby places to Hawksworth
What else we do in Hawksworth
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
Why repair rather than replace?
Many people think a damaged bath means a new one. Typically it does not: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Our bath repair starts from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why us?
- We come to you, anywhere in the UK
- Rooms protected and left tidy
- One-year guarantee on every repair
- Usually one visit, start to finish
See our full price list or guide to resurfacing and replacement costs.
What we do, step by step
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which usually takes a morning or an afternoon. If anything looks different from your photos, we will talk to you before going ahead.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
How to prepare
- Let us know if it has been repaired before
- Open a window if you can
- Mention if the room is upstairs or in a flat
Getting a price
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
Read more
Landlord and trade work in Hawksworth
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
FAQs for Hawksworth
Will there be a smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and you will get one combined price.
Is there a call-out fee?
We don’t add a call-out fee. The fixed price covers the visit and the work.
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
What areas do you cover?
The entire UK, including all of Nottinghamshire. Just include your postcode and we’ll offer you dates.
Is it worth repairing rather than replacing?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787.
Looking after it afterwards
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Keep metal cans and razors off the surface
- Don’t leave a fresh chip for long
- A dripping tap stains enamel, so fix it early
- Give the bath a quick rinse after use
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
What we cannot put right
A repair is not always the answer, and we’ll tell you before we start. We can’t fix:
- Flexing caused by a failed cradle or loose feet
- A steel bath rusted through
- Leaking fittings, which need a plumber
Send us pictures and we’ll tell you honestly before you book.
Materials we work on in Hawksworth
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
About our accreditations · Every repair comes with a one-year guarantee.
