Nottinghamshire · England
Bath Repair in Orston
Damaged bath in Orston? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Snagging damage from a refit
- A chipped rim or side
Landlords, agents and businesses in Orston
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Bath repair in Orston, done in place
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. Typical jobs include snagging damage from a refit and chips along the edge of the bath, across cast iron enamel, roll-top & freestanding and whirlpool & spa baths.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Area
- Orston (NG13)
- Region
- Nottinghamshire
- Cover
- 12 months on all our work
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Should you replace it?
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and replacing like for like isn’t cheap. A repair keeps it in place. Repairs from £95, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why us?
- Free fixed quotes from pictures
- Every repair guaranteed for a year
- Accredited with CHAS, Constructionline and SafeContractor
- Colour-matched on site
See our prices page or guide to resurfacing and replacement costs.
How it works
We agree an arrival time beforehand, so you know when to expect us. Once we’re there, the work takes a few hours for most jobs. We leave the room clean.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
How to prepare
- Make sure the area is dry
- Mention if the room is upstairs or in a flat
- Keep a parking space free if you can
Ask for a price
Send us a photo of the damage and a wider shot of the whole item, and tell us you are in Orston, and we’ll come back with a fixed quote.
Read more
Signs you need bath repair in Orston
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
Send us a picture if you notice any of these:
- Chips under the taps
- Holes from dropped items
- A chipped rim or side
- A failed DIY repair that is discoloured or lifting
Questions to ask before booking
- How long it needs to cure
- What the guarantee covers, and for how long
- What protection goes down before work starts
- How the colour is matched
What a repair cannot fix
We would rather lose a job than do one that will not last, so these are the limits:
- A steel bath rusted through
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Wear across the whole surface, which needs re-enamelling
Send us photos and we will tell you honestly.
What we work on
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Clean with warm water and a mild detergent
- Do not leave a fresh chip for long
- Put a towel in the bath if you are working above it
- Keep abrasive pads and gritty cleaners away from the bath
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Remove it before the repair.
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Orston and the surrounding area
Orston is about 8 miles south of Newark-on-Trent, in Nottinghamshire. Anywhere in NG13, a technician comes to you. We cover all 329 towns and villages in Nottinghamshire, from the larger towns to small villages. Our jobs stretch from Orston to Birmingham (about 55 miles away).
Our technicians cover all of the NG13 postcode area. From Maule Court, Lombard Street and Hill Road or a nearby road, we can come to you. Nearby, we also work in Flawborough (2 miles north-east), Whatton-in-the-Vale (2 miles south-west), Hawksworth (2 miles north-west), Aslockton (2 miles west) and Kilvington (2 miles north-east). Within a short drive, we also cover Carlton (10 miles west), Newark-on-Trent (8 miles north), West Bridgford (12 miles west), Netherfield (9 miles west), Bingham (4 miles west) and Radcliffe on Trent (7 miles west).
What’s near Orston
In Orston, that means homes near Belvoir High School, Orston Primary School and Church of St Mary, among other places. Orston’s nearest station is Elton & Orston station, roughly 0.5 miles south of the centre. Other landmarks nearby include Flintham Museum (3.8 miles north-west).
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Common questions in Orston
How do I book?
Photos of the damage, a photo of the whole bath and your postcode. Then we will agree a date.
How much does bath repair cost in Orston?
Prices start from £95. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Will the repair last?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.
What happens once I’ve sent photos?
We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.
Can you redo someone else’s repair?
Yes, we frequently do. It can add a little time, which we include in the quote.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit generally costs less than separate visits. Include photos of each item.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Orston.
Towns and villages near Orston
Also in Orston
About our accreditations · Every repair comes with a one-year guarantee.
