Warwickshire · England
Bath Repair in Avon Dassett
Damaged bath in Avon Dassett? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Chips caused by builders
- A kit repair that didn’t last
How we handle bath repair in Avon Dassett
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place with a one-year guarantee. We work on cast iron enamel, acrylic and pressed steel enamel, and common reasons people contact us are chips on the rim or sides and chips caused by builders.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Where
- Avon Dassett (CV47)
- Area hub
- Warwickshire
- Guarantee
- A year, on every repair
- Price
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
When to call us in Avon Dassett
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
Common reasons people in Avon Dassett contact us include:
- Damage beneath the taps
- Impact holes in acrylic
- Snagging damage from a refit
- A cracked acrylic bath
Questions to ask before you book
- Who will actually do the work
- How long it needs to cure
- Whether the price is fixed and includes VAT
- Whether the price covers travel
Places near Avon Dassett
Also in Avon Dassett
Avon Dassett and nearby
Avon Dassett is about 6 miles north-west of Banbury, in Warwickshire. Our technicians come to clients in Avon Dassett and nearby villages, so nothing has to leave your home. We cover 324 places in Warwickshire. Our nearest city page is Birmingham, about 30 miles away.
Our visits in CV47 are booked in the same way as anywhere else. We also cover the places around Avon Dassett: Warmington (1 mile south), Northend (2 miles north-west), Temple Herdewyke (2 miles north-west), Ratley (2 miles south-west) and Radway (3 miles south-west). Further out, we also cover Warwick (12 miles north-west), Royal Leamington Spa (11 miles north-west), Stratford-upon-Avon (14 miles west), Leamington Spa (11 miles north-west), Kenilworth (15 miles north-west) and Southam (7 miles north).
Local landmarks in Avon Dassett
Our clients here include homes close to St John the Baptist's Church, among other places. Further afield, we also cover the area around Bygones Museum (3 miles east) and Hanwell Castle (4.3 miles south). The countryside around Avon Dassett includes Edge Hill.
What we cannot put right
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Flexing caused by a failed cradle or loose feet
- Leaking fittings, which need a plumber
- A steel bath rusted through
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
Prices and what affects them
Prices start from £95. We charge the same across the UK, including Avon Dassett. The price reflects:
- Any earlier repairs that need removing first
- How easy the damage is to reach
- The material and finish
- The size and number of damaged areas
We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your pictures
You can generally get a fixed price without us visiting. To help us price it:
- Any earlier repairs or coatings
- Any details about the material
- A wider photo showing the entire bath
- Good light, ideally daylight, without flash glare
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Your questions about bath repair in Avon Dassett
What about rust by the waste?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Can a cracked acrylic bath be fixed?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Can you repair a chip on a coloured bath?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Can pets and children be at home?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Warwickshire.
What does bath repair cost?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.
Landlord and trade work in Avon Dassett
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
The process
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job generally takes a few hours. We tidy up before we leave and let you know when you can use it again.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Before we arrive
- Point us to the nearest place to park
- Tell us if there are stairs or a lift
- Clear the area around the damage
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them to us. You will get a fixed price, not an estimate.
Advice
Keeping it looking good
So the finish stays in good condition:
- Store metal items away from the bath
- Get any new chip repaired before it rusts
- Rinse the bath after use, especially in hard water areas
- Stick to mild cleaners and a soft cloth
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
Stop using the bath if a crack lets water through until it’s repaired. Water under the bath can damage the floor and the ceiling below.
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it does not work out, we can still repair it properly.
About our accreditations · Every repair comes with a one-year guarantee.
