Oxfordshire · England
Bath Repair in Edgehill
Bath repair for Edgehill, without a refit. Send us photos for a fixed price, then we come to you.
- Repairs from £95
- Chips along the edge of the bath
- Holes from dropped items
Covering Edgehill
Edgehill is about 6 miles north-west of Banbury, in Oxfordshire. Wherever you are in the OX15 postcode area, we come to you. We work in 443 places in Oxfordshire, from the larger towns to small villages. Our jobs stretch from Edgehill to Birmingham (30 miles away).
Postcode districts we cover here: OX15 and CV35. Other places close to Edgehill include Ratley (1 mile east), Radway (1 mile north), Sun Rising (1 mile south-west), Hornton (2 miles south-east) and Warmington (2 miles east). Larger places within reach include Banbury (6 miles south-east), Chipping Norton (13 miles south), Neithrop (6 miles south-east), Grimsbury (7 miles south-east), Ruscote (6 miles south-east) and Bloxham (8 miles south-east).
Landmarks near Edgehill
Typical jobs here are in homes near Castle at Edgehill pub and Church of St Peter and the streets around them. Further afield, we also cover the area around W. O. Bentley Memorial Foundation (3.5 miles south-east) and King John's Castle (3.5 miles north-west). Not far away are Edge Hill.
Bath repair in Edgehill, done in place
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. There is no plumbing to disconnect, the tiles aren’t touched, and the repaired area is colour matched so it blends in. Whether it’s a hole punched through by something heavy and snagging damage from a refit, we can help.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Edgehill (OX15, CV35)
- Region
- Oxfordshire
- Cover
- A year, on every repair
- Quote
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
The process
We agree an arrival time beforehand, so you know when to expect us. On site, it takes two to three hours for most chips in most cases. We leave the room clean.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Keep pets and children out of the room while we work
- Keep a parking space free if you can
- Avoid using the area for a few hours before we arrive
Ask for a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
Related advice
What affects the price in Edgehill
Repairs from £95. You will not pay by the hour. The price is based on:
- The material
- The size and number of damaged areas
- The type of damage
- The colour and finish to match
The price reflects the work involved, not your postcode. You will see the full price before you book.
Send photos for a quote
A couple of clear pictures is all it takes. Try to include:
- A close-up of the damage, in focus
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Common problems we fix in Edgehill
Acrylic baths that crack nearly always have a support problem. Legs that are not adjusted, a missing cradle or a soft floor let the base flex until the acrylic gives way.
Common reasons people in Edgehill contact us are:
- Impact holes in acrylic
- Chips caused by builders
- Rust by the waste and overflow
- Deep scratches in acrylic
Before booking anyone
- How changes to the job are handled
- Whether the price is fixed and includes VAT
- Whether there are any call-out or travel charges
- Whether a trained technician does the job
Nearby places to Edgehill
What else we do in Edgehill
Repair or replace in Edgehill?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Repairs from £95, with every job priced individually. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Why Edgehill clients choose us
- CHAS, Constructionline and SafeContractor accredited
- Honest advice, even when it means no job
- Nothing taken out or refitted
- A year’s guarantee on all work
Read our full price list or resurfacing vs replacement cost guide.
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We’re used to working with agents and managing companies. Send the address, pictures and access details and we’ll arrange it.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Edgehill: your questions answered
Will the repair last?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Do the materials smell?
There may be a mild smell during the work, which fades afterwards.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and we will quote them together.
How invisible is a bath repair?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll tell you when the room can be used again.
What a repair can’t fix
Before you book, it’s worth knowing the limits:
- Cracks in acrylic we cannot reach from underneath
- Water coming from the waste or taps rather than the bath
- A steel bath rusted through
Send us photos and we’ll tell you honestly before booking.
What we work on
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
What your bath is made of matters
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so repair chips early.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
About our accreditations · Every repair comes with a one-year guarantee.
