Staffordshire · England
Bath Repair in Barnfields
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Barnfields, with a one-year guarantee on every repair.
- Repairs from £95
- Snagging damage from a refit
- Holes from dropped items
Bath repair in Barnfields, done in place
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in one visit. Common call-outs are for chips on the rim or sides and snagging damage from a refit, in roll-top & freestanding, cast iron enamel and whirlpool & spa baths.
Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Where
- Barnfields (ST13)
- Area hub
- Staffordshire
- Warranty
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Our work in Barnfields
Barnfields is about 8 miles north-east of Burslem, in Staffordshire. Jobs in Barnfields are booked in like any other job: a fixed price from your pictures, then a visit to do the work. We cover all 512 towns and villages in Staffordshire. You can also see our page for Manchester, about 27 miles away.
All of ST13 is covered. From High Street, Beggars Lane and Sneyd Avenue or anywhere nearby, we can come to you. You’ll find Barnfields on the A53 and A520, which makes it straightforward to reach. Neighbouring places we cover include Woodcroft (1 mile west), Wallbridge Park (1 mile west), Birchall (1 mile south-east), Lowe Hill (1 mile east) and Leekbrook (1 mile south). We also work in nearby towns such as Newcastle-under-Lyme (10 miles south-west), Longton (9 miles south-west), Stone (15 miles south), Biddulph (6 miles west), Alsager (12 miles west) and Kidsgrove (9 miles west).
Near you in Barnfields
Around Barnfields, we work in homes near All Saints Church, The Unicorn Public House and All Saints CofE First School. A little further out are St Edward's Hospital (1.3 miles south) and Nicholson Institute and Leek College of Further Education (0.7 miles north). Not far away are Gun and Coombes Valley RSPB reserve.
What a repair cannot fix
A repair is not right for every job, for example:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Metal that has corroded all the way through
- Flexing caused by a failed cradle or loose feet
Not sure? Send photos and we’ll give you a straight answer.
Surfaces we repair
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
Your questions about bath repair in Barnfields
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
What if the damage is worse than the photos show?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
Is there a guarantee?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
Can you repair a hole in a bath?
Normally, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
Will I be able to see the repair?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference, and we’ll tell you what to expect.
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
What we do, step by step
We agree an arrival time beforehand, so you are not left guessing. Once we’re there, the work takes a few hours, depending on the damage. We leave the room clean and ready to use once it has cured.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Move bottles, mats and clutter away from the area
- Keep pets and children out of the room while we work
- Let us know about parking or access
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Advice
Towns and villages near Barnfields
More services for Barnfields
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
How we price bath repair
Prices start from £95. A fixed quote means you know the cost before booking. We look at:
- Access to the area
- The type of damage
- The material
- Unusual colours or finishes
Compared with replacing, repairing normally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Quotes from your photos
You can typically get a fixed quote without us visiting. To help us price it:
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
- A picture taken from further back
- One sharp close-up of the damage
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and you are under no obligation.
Landlords, agents and businesses in Barnfields
For anyone letting property in or around Barnfields, we can repair and quote for several addresses together. Send pictures for each one and we will come back with a combined price.
We work for landlords, letting agents and housing providers in Barnfields as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Keeping it looking good
After the repair has cured, a few habits help it last:
- Protect the bath with a towel when doing jobs nearby
- Don’t leave razors or cans standing in the bath
- Use a soft cloth and washing-up liquid for everyday cleaning
- Rinse it down after each bath
A repaired bath needs no special treatment, just sensible cleaning. Avoid bleach-based and gritty cleaners and give it a rinse after each bath.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
Repairing versus replacing in Barnfields
Replacing a fitted bath normally means a plumber, removing the old bath, making good the tiles and panel and getting rid of the old bath. A repair fixes just the damaged area in one visit. Prices start from £95. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access.
What you get with us
- One visit for most repairs
- Colour-matched on site
- No extra charge for your area
- Nothing taken out or refitted
Take a look at our pricing or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
