Leicestershire · England
Bath Repair for Barsby homes
Problem with your bath in Barsby? We repair it in place, match it on site and guarantee the work for a year.
- Repairs from £95
- Deep scratches in acrylic
- Chips caused by builders
Your questions about bath repair in Barsby
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Will I be able to see the repair?
On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Do you come to Barsby?
Yes, we do. We send a technician to Barsby for every job, with no extra charge for travel.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
What does bath repair cost?
Repairs from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
Bath repair at your home in Barsby
You don’t need a new bath because of a chip. Our technicians fill, shape and refinish the damage, with the colour mixed on site so the repair is hard to spot. We’re often asked to fix chips caused by builders and impact holes in acrylic, on whirlpool & spa baths, cast iron enamel and roll-top & freestanding.
Big or small, you get the same one-year guarantee in Barsby and across Leicestershire.
- Area
- Barsby (LE7)
- Area hub
- Leicestershire
- Cover
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath repair
Prices start from £95. Prices are worked out job by job. What matters most is:
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
- How many items we do on one visit
- The colour and finish to match
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Send pictures for a quote
Two or three clear photos are usually enough. Try to include:
- One picture of the whole bath
- Any earlier repairs or coatings
- The postcode, so we can plan the visit
- A close-up of the damage, in focus
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
What happens on the day
Arrival times are agreed in advance. On site, it takes two to three hours for most chips in most cases. The room is left tidy and you’ll know when it can be used.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Let us know about parking or access
- Mention any earlier repairs or resurfacing
- Have a window or extractor fan available
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Read more
Signs you need bath repair in Barsby
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
People normally call us when they notice something like this:
- Chips on the rim or sides
- A hole punched through by something heavy
- An old repair that has yellowed or come loose
- Snagging damage from a refit
What your quote should include
- Whether a trained technician does the job
- How the colour is matched
- How long it needs to cure
- Aftercare advice
When we’d advise against a repair
Not everything can be repaired, and we would rather say so up front. Repairs will not solve:
- Cracks in parts of an acrylic bath we can’t get to from below
- Water coming from the waste or taps rather than the bath
- Metal that has corroded all the way through
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
Where we work around Barsby
Barsby is about 5 miles east of Syston, in Leicestershire. From the centre of Barsby to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Barsby is one of 287 towns and villages in Leicestershire we cover. You can also see our page for Birmingham, about 42 miles away.
We cover every part of LE7 and the streets around it. We also cover the places around Barsby: South Croxton (1 mile south-west), Twyford (2 miles east), Thorpe Satchville (2 miles east), Hungarton (3 miles south) and Lowesby (3 miles south-east). Larger places within reach include Loughborough (12 miles north-west), Wigston (10 miles south-west), Melton Mowbray (6 miles north-east), Shepshed (15 miles west), Syston (5 miles west) and Shelthorpe (11 miles north-west).
What’s near Barsby
Locally, our jobs take us to homes close to Gaddesby Primary School and St Mary's Church. The nearest railway station is Syston station, roughly 4.9 miles west.
Places near Barsby
Also in Barsby
Looking after it afterwards
Aftercare is simple:
- Keep abrasive pads and gritty cleaners away from the bath
- Store metal items away from the bath
- If an acrylic bath flexes, have its feet adjusted
- Put a towel in the bath if you are working above it
Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.
If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.
Repairing versus replacing in Barsby
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and nothing else in the room changes. Prices start from £95. A repair is priced on what needs doing, not your postcode. You will see the full price before booking.
Why book with us
- Everything repaired in place
- One price list for the whole UK
- A year’s guarantee on all work
- One visit for most repairs
See our prices page and bath cost comparison.
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Landlords, agents and businesses in Barsby
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
About our accreditations · Every repair comes with a one-year guarantee.
