Hampshire · England
Bath chip & crack repair in Baybridge, Hampshire
Bath repair in Baybridge without the cost of replacing. Send us pictures for a fixed quote, then book a visit.
- Repairs from £95
- A kit repair that didn’t last
- Snagging damage from a refit
Bath repair in Baybridge, done in place
You don’t need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site. Typical jobs include damage beneath the taps and deep scratches in acrylic, on acrylic, roll-top & freestanding and whirlpool & spa baths.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Where
- Baybridge (SO21)
- Area hub
- Hampshire
- Cover
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Keep abrasive pads and gritty cleaners away from the bath
- Stick to mild cleaners and a soft cloth
- Have new chips seen to early
- Fix dripping taps early to stop staining and limescale
Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.
About Baybridge
Baybridge is about 5 miles south-east of Winchester, in Hampshire. From the centre of Baybridge to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Baybridge is one of 683 places in Hampshire we cover. We work right across the region, from Baybridge to London (about 61 miles away).
Here we cover the SO21 postcode area. Other places close to Baybridge include Owslebury (1 mile north-west), Owslebury Bottom (1 mile north-west), Hensting (2 miles west), Morestead (2 miles north-west) and Lane End (2 miles north-east). Further out, we also cover Winchester (5 miles north-west), Gosport (14 miles south), Havant (15 miles south-east), Eastleigh (5 miles south-west), Fareham (11 miles south) and Horndean (12 miles south-east).
What’s near Baybridge
Around Baybridge, we work in homes near Ship Inn, Owslebury Primary School and Church of St Andrew, among other places. Baybridge’s nearest station is Shawford station, roughly 3.5 miles west. A little further out are St John's Rooms And Chapel (4.7 miles north-west) and Bishop's Waltham Museum (3.8 miles south-east). For a walk, there is Twyford Down and Hockley Meadows.
Why repair rather than replace?
Replacing a bath rarely stops at the bath: tiles along the rim normally crack when it comes out, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. A repair skips all of it. Our bath repair starts from £95. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Why us?
- CHAS, Constructionline and SafeContractor accredited
- Colour-matched on site
- We come to you, anywhere in the UK
- No need to remove anything
See our full price list or guide to resurfacing and replacement costs.
Honest limits
Honesty matters more than a booking, so here’s what a repair will not do:
- Rust that has eaten right through a steel bath
- Wear across the whole surface, which needs re-enamelling
- Water coming from the waste or taps rather than the bath
Send us photos and we’ll tell you honestly.
What we work on
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
Towns and villages near Baybridge
Also in Baybridge
How the visit works
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which typically takes two to three hours for most chips. If we find something your photos didn’t show, we will explain it before carrying on.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the next day.
Before we arrive
- Move bottles, mats and clutter away from the area
- Mention any parking restrictions or tricky access
- Let us know if it has been repaired before
Get a quote
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed quote back. Quotes are free and you are under no obligation.
Advice
For landlords and businesses
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll handle the rest.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Do you need bath repair in Baybridge?
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, any chip down to the metal lets water in, and rust follows.
Look out for these signs:
- Hairline or through cracks in acrylic
- Scuffs and scratches in the surface
- Impact holes in acrylic
- Rust by the waste and overflow
Comparing quotes
- If travel is included in the price
- What prep work is covered
- What happens if they find more damage
- How soon you can use it again
Repairs by material
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Your questions about bath repair in Baybridge
Is there any odour?
There may be a mild smell during the work that clears as it cures.
Is there a call-out fee?
We do not add a call-out fee. Your fixed quote includes everything.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
What information do you need?
Photos of the damage, a picture of the whole bath and your postcode. Then we will agree a date.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
I tried a repair kit. Can you fix it?
Regularly. We strip it out, deal with any rust and repair it again.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Is the work guaranteed?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
About our accreditations · Every repair comes with a one-year guarantee.
