Glasgow · Scotland

Bath chip & crack repair in Maryhill Park, Glasgow

Problem with your bath in Maryhill Park? We repair it in place, match it on site and guarantee the work for a year.

  • Repairs from £95
  • Chips along the edge of the bath
  • Damage beneath the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Maryhill Park

About our bath repair in Maryhill Park

We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. If you’re dealing with rusty patches near the plughole and a failed DIY repair that’s discoloured or lifting, we can normally put it right.

Your repair is guaranteed for a year, as with every job we do.

Where
Maryhill Park (G20, G23, G61)
County
Glasgow
Warranty
One year on every repair
Quote
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

When a repair isn’t the answer

We would rather lose a job than do one that won’t last, so these are the limits:

  • A bath worn all over, where resurfacing makes more sense
  • Leaking fittings, which need a plumber
  • Flexing caused by a failed cradle or loose feet

If in doubt, send pictures and we will say what we think before you book.

What we work on

  • Acrylic
  • Cast iron enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Pressed steel enamel

How the visit works

Arrival times are agreed in advance. On site, it takes a morning or an afternoon for most jobs. We leave the room clean and ready to use once it has cured.

  1. We start by looking at the damage and confirming the plan with you.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

Preparing for the visit

  • Point us to the nearest place to park
  • Keep children and pets away from the room on the day
  • Let us know if it has been repaired before

How to get a price

A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them over. You’ll get a fixed quote, not an estimate.

Send pictures for a quote

Advice

Should I try a DIY kit first?

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.

If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.

Materials and what they mean for the repair

Composite and resin

Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, in much the same way.

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Prices and what affects them

Prices start from £95. You will know the full cost before booking. We look at:

  • Access to the area
  • How much damage there is
  • Whether old repairs or coatings need taking off
  • What kind of damage it is

What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your photos, so there are no surprises on the day.

Quotes from your photos

The better the photos, the more accurate the price. Here’s what we find most useful:

  • Something in shot to show the size
  • Whether it’s been repaired or coated before
  • Daylight if possible, and no flash reflection
  • Where you are, by postcode

We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Landlords, agents and businesses in Maryhill Park

For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

About Maryhill Park

Maryhill Park is about 2 miles south-east of Bearsden, in Glasgow. We travel to customers in Maryhill Park, so you do not need to take anything anywhere. We cover all 183 towns and villages in Glasgow, from the larger towns to small villages.

Postcode districts we cover here: G20, G23 and G61. We regularly work on streets such as Acre Road, Torrin Road and Harris Road and the roads around them. We also cover the places around Maryhill Park: Westerton (1 mile west), Bearsden (2 miles north-west), Auchenhowie (2 miles north), Blairdardie (2 miles west) and Drumchapel (2 miles west). Within a short drive, we also cover Glasgow (3 miles south), Garnethill (3 miles south-east), Anderston (3 miles south-east), Calton (4 miles south-east), Kelvingrove (3 miles south) and Blythswood Hill (3 miles south-east).

Landmarks near Maryhill Park

Around Maryhill Park, we work in homes near John Paul Academy, Lock 27 pub and Dawsholm Park. Maryhill Park has its own railway station: Maryhill station. Nearby you will also find Chinatown (2.8 miles south-east) and Gartnavel General Hospital (1.4 miles south). Green spaces nearby include Kilmardinny and Castle Hill.

Map of Maryhill Park © OpenStreetMap contributors

What we’re called out for in Maryhill Park

Acrylic baths that crack nearly always have a support problem. Legs that aren’t adjusted, a missing cradle or a soft floor let the base flex.

Customers generally contact us about:

  • Rust spots around the plughole
  • Scuffs and scratches in the surface
  • Damage beneath the taps
  • Chips along the edge of the bath

Questions to ask before booking

  • Aftercare advice
  • How your room will be protected
  • How long the guarantee is and what it covers
  • How long it needs to cure

Choosing a repair company

Your questions about bath repair in Maryhill Park

What information do you need?

Some photos, your postcode and how to reach you. On the day, we only need access to the room.

Does someone need to be in?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Is there a call-out fee?

Travel is included in the price, and we charge the same wherever you are.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as homeowners in Maryhill Park.

Can you redo someone else’s repair?

In most cases. We remove the old repair before doing a new one.

Can I get a quote without a visit?

Typically, yes. A close-up and a wider photo are enough to give a fixed quote.

Do the materials smell?

Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.

What happens after I send photos?

We come back with a fixed quote, plus dates. There is no obligation to book.

Aftercare tips

Aftercare is simple:

  • Rinse the bath after use, especially in hard water areas
  • Have new chips seen to early
  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Store metal items away from the bath

Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.

Stop using the bath if a crack lets water through. Leaks under a bath can damage floors and ceilings.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.